Automatic Potentiometric Titrator [AT-710S]

.

PRODUCT

Automatic Potentiometric Titrator [AT-710S]

Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry.
Monitoring temperature during titration ensures safe measurements.

request a quote

Do NOT CHANGE OR REMOVE THIS ELEMENT

Automatic Potentiometric Titrator [AT-710S]

Spares and accessories

Features

Titrant Information is stored in an IC chip in the burette unit (Smart burette)
Information stored in the electrode cable (Smart electrode)
New burette unit
Large color TFT-LCD with a touch panel(8.4-inch)
Two different user levels and permisions
Two different potentials , such as pH/ transmittance , pH/ conductivity or pH/ temperature can be logged simultaneously.
Monitoring temperature during titration ensures safe measurements
Measurement results are converted to PDF and can be stored in a USB flash drive

specifications

Type	Automatic Potentiometric Titrator
Model	AT-710S
Product configuration	MCU-710S + AT-710 + IDP-100 + Propeller stirrer
Detection range	1) Potentiometric : -2000mV to +2000mV 2)pH :-20.000 to 20.000pH 3)Temp. : 0 to 100°C
Titration mode	Auto Titration , Auto Intermit , Intermit , Stat , Petroleum Titration , COD
Method	Standard method 120 , Combined method 10 (Max 5 methods can be linked)
Kinds of titration	Potentiometric (acid/base , redox , precipitation) , Photometric , Polarization , Conductivity
Titration form	Full titration (Auto EP detection) , EP Stop , Level Stop , Intersect , EP Stop/Level Stop
Special application	Measurement of electrode potential (pH , potential) , Acid dissociation constant (pKa) Simultaneous recording of 2-way input potential (e.g. Titer vs. pH+%T , Titer vs. pH+μS) , Learn
Key operation	Touch panel
Displays	1) 8.4-inch color LCD 800 x 600 dots 2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish / German / French 3) 1-channel display
Calculation	Concentration of content , statistics data processing (mean , SD and RSD) and automatic averaging of blank and factor value
Data storage	500 samples
GLP conformance	Registration of operator / User group administration Titrant : Reminder of date of factor measurement / Alarm to indicate remaining reagent / Reminder of piston replacement date / Reminder of reagent replacement date / History of factor measurement Check performance :Reminder of scheduled checkdate / Record of check results Management of electrode : Reminder of calibration date / Record of calibration history / Electrode check / History of electrode check Verification of burette capacity : Verification of burette capacity Management of conduction time : Display of operating time
Burette size	20mL glass burette with brown cover (Standard) Optional burette units : 10mL , 5mL , or 1mL
Burette accuracy	50mL burette(Auto dispenser) +/- 0.5mL 20mL burette +/- 0.02mL ; reproducibility +/- 0.01mL 10mL burette +/- 0.015mL ; reproducibility +/- 0.005mL 5mL burette +/- 0.01mL ; reproducibility +/- 0.003mL 1mL burette +/- 0.005mL ; reproducibility +/- 0.001mL
Preamplifier	1) STD:pH (mV) and mV , 2 inputs (Standard) 2) PTA:pH (mV) , mV and photometric , 3 inputs 3) POT:pH (mV) , mV and polar , 3 inputs 4) CMT:pH (mV) , mV and conductivity ,3 inputs (factory setting required) 5) TET:pH (mV) 2 ways and mV , inputs (factory setting required)
External I/O	RS-232C port x3 : for Dot matrix printer/Electronic balance/Data Capture Software (SOFT-CAP) SS-BUS x1 : for Multiple sample changer , APB ELE. x1 : for Smart electrode USB x1 : for USB flash drive , Thermal printer , A4 printer , Keyboard , Barcode reader , Foot switch , USB HUB TEMP.COMP. x1 : Input terminal for temperature sensor to correct reagent volume , sensor Pt100 , temperature reading accuracy : +/- 0.5°C (burette 1 only)
Extensibility	–
Ambient condition	1) Temperature:5 to 35°C 2) Humidity:85%RH or below (no condensation)
Power source	AC100 to 240V +/- 10% 50/60 Hz
Power consumption	Main unit : Approx. 30W Printer : Approx. 7W
Dimensions	Touch panel controller : 225(W) x 190(D) x 42(H)mm Titration unit : 141(W) x 296(D) x 367(H)mm (not incl. tubing) Printer : 106(W) x 180(D) x 88(H) mm
Weight	Touch panel controller : Approx. 1.5kg Titration unit : Approx. 4.0kg Printer: Approx. 0.4kg
Conformity standard	CE marking EMC : EN61326-1 LVD : EN61010-1 RE Directive Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Automatic Potentiometric Titrator [AT-710S]

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for AT-710S

Software for Automatric Potentiometric Titrators [AT-Win]

AT-Win software enables your PC to control KEM’s Automatic Potentiometric Titrators
e.g., AT-710B, AT-700, AT-510 or AT-500N.

Show More Show Less

Analysis Software for Titration Results [Tview6]

This software allows to capture the data stored in the titrators (AT-710B,AT-700,MKA-610, MKC-610, AT-610 and AT-510) on a personal computer through CF memory card to manage/analyze titration results.

Show More Show Less

Data Acquisition Software [SOFT-CAP]

This software allows to capture the data stored in the titrators (AT-710B,AT-700,MKA-610, MKC-610, AT-610 and AT-510) on a personal computer through CF memory card to manage/analyze titration results.

Show More Show Less