Infinity XE 503X membrane nitrogen generator
Producing between 30-390 L/min of high quality, laboratory grade nitrogen gas, the Infinity XE 503X can comfortably supply gas for multiple laboratory instruments. With variable nitrogen purity available between 95-99.5% (depending on flow rate), Infinity XE generators can be configured to suit the needs of several applications, such as LC-MS, ELSD, Sample Preparation & more.
Peak Scientific’s Infinity XE series generators have been engineered to provide nitrogen gas to laboratories that already have an external source of clean, dry & oil-free air; and meets a minimum grade of ISO8573-1:2010 Class 1.4.1 – NB: Were this is not available, Peak can provide consultative assistance on what specifications of compressed air & pre-filtration are required, as well as supply these items as part of a complete Infinity XE gas generation solution.
Infinity XE series nitrogen generators are effectively silent whilst in operation and have no moving parts, so require minimal annual maintenance.
Models available with or without optional O2 analyzer & purity safeguard system.
Infinity XE 503X membrane nitrogen generator
Features
- Flow rates from 30-390 L/min
- Variable flow rate, with up to 135 psi outlet pressure
- N2 purity from 95-99.5% (dependent on flow rate)
- Tried and tested membrane technology for high quality gas
- Small footprint using minimal laboratory space
- Effectively silent when in operation
- O2 analyzer option available, XE 5031 model includes PurityGuard for purity critical applications
specifications
Gas Type | Nitrogen |
---|---|
Min Gas Flow | 30L/min |
Max Gas Flow | 390L/min |
Max Output Pressure | 135psi/9.3bar |
Max Purity | 99.5% |
Site & Installation |
|
Min Inlet Pressure | 60psi/4.1bar |
Max Inlet Pressure | 145psi/10bar |
Min Inlet Air Quality | ISO8573 – 1:2010 Class 1.4.1 |
Start Up Time | 30 mins |
Voltage | 100-230 ± 10% VAC |
Frequency | 50 / 60 Hz |
Current | 0.4Amps at 100V / 0.174Amps at 230V |
Max Operating Temp | 30°C / 86°F |
Particles | <0.01µm |
Accreditations | CE |
Dimensions & weight |
|
Size (HxWxD) mm | 995 x 500 x 500 mm |
Size (HxWxD) Inches | 39.2 x 19.7 x 19.7 inches |
Generator Weight | 85kg / 187lbs |
Service Requirements |
|
Annual maintenance | |
Annual O2 sensor calibration (where applicable) |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–