Solaris XE Lab for Waters – N2 solution for ACQUITY™ QDa™
Peak Scientific’s Solaris XE nitrogen generator offers a reliable, compressor-free gas solution that can comfortably meet the demands of most mass spectrometers within Waters’ portfolio of instruments. Using our tried and tested membrane technology, Solaris XE can operate with varying flow rates (up to 35L/min of high purity nitrogen), purity (up to 99.5%) and outlet pressure can be adjusted down from 116psi.
Solaris XE for Waters has been designed in collaboration with Waters as a dedicated gas solution for the ACQUITY QDa Detector. Solaris XE is fitted with alignment blocks specifically designed to enable the generator to be stacked underneath the ACQUITY QDa in most modular stacking configurations*, providing a compact and discreet space-saving solution within the lab. Alternatively this unit can be wall mounted or free standing on a lab bench.
The Solaris XE has been engineered to provide nitrogen to laboratories that utilize an external source of compressed air, which meets a minimum quality grade of ISO 8573-1:2010 Class 1.4.1. *Please ask your local sales representative for advice on supported stacking configurations
Solaris XE Lab for Waters – N2 solution for ACQUITY™ QDa™
Features
- Nitrogen up to 35L/min, up to 116 psi and up to 99.5% purity
- Variable outlet flow, pressure and purity
- Compact, stackable* system maximising the use of valuable laboratory floor or bench space
- Colour indicative LED lighting for easy status awareness
- Manufactured and tested to highest spec in UK, CE/FCC certified
- Safer and more convenient than pressurized cylinders, dewars or bulk storage
- 12 month on-site comprehensive warranty
- Backed by [Peak Protected] global on premise servicing and technical suppor
*units stacked on top of Solaris must not exceed 100kg/220.4lbs
specifications
Gas Type | Nitrogen |
---|---|
Min Gas Flow | 0 |
Max Gas Flow | 35 |
Max Output Pressure | 116psi/8bar |
Max Purity | 99.50% |
Site & Installation |
|
Gas Outlets Fitting | 1 x 1/4 ” BSPP |
Min Inlet Pressure | 80psi/5.5bar |
Max Inlet Pressure | 145psi/10bar |
Min Inlet Air Quality | ISO 8753-1:2010 Class 1.4.1 |
Start Up Time | 5 min |
Power Consumption | Up to 6.9 Watts |
Voltage | 100 / 230 VAC |
Frequency | 50 / 60 Hz |
Current | 0.03 Amp |
Heat output | 25 |
Max Operating Temp | 30°C / 86°F |
Contaminants | Phthalate & BHT Free |
Accreditations | CE, FCC, CSA |
Dimensions & weight |
|
Size (HxWxD) mm | 156 x 343 x 650 mm |
Size (HxWxD) Inches | 6.1 x 13.5 x 25.6 inches |
Generator Weight | 15kg / 33lbs |
Max Weight Bearing Capability | 100kg / 220lbs |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–