.

PRODUCT

  1. Home
  2. chevron_right
  3. Products
  4. chevron_right
  5. Laboratory Supplies
  6. chevron_right
  7. Material Testing
  8. chevron_right
  9. Flash Point
  10. chevron_right
  11. Small Scale Flash Point
  12. chevron_right
  13. Setaflash SeSetaflash Series 3 ActiveCool Flash Point Tester – Corrosion Resistant Cup – 33250-3

Setaflash SeSetaflash Series 3 ActiveCool Flash Point Tester – Corrosion Resistant Cup – 33250-3

Setaflash Series 3 ActiveCool provides fast and reliable flash point results and requires minimum operator expertise. It has been designed to rapidly and efficiently carry out Flash / No Flash tests to determine the flash point of liquids and semi-solids in the 10 to 135 °C temperature range.

• Compliance
• Safety
• Product quality
• 2 ml of sample and a result in less than 2 minutes

Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.

Setaflash Series 3 ActiveCool has a very simple user interface with colour digital display and touch screen icons which guide the operator through a straightforward testing process. For easy record keeping the instrument stores 100,000 test results which can be saved and transferred via a USB port.

The versatile range of Setaflash instruments is ideal for use in the laboratory, production line or for portable test applications.

request a quote
Do NOT CHANGE OR REMOVE THIS ELEMENT

Setaflash SeSetaflash Series 3 ActiveCool Flash Point Tester – Corrosion Resistant Cup – 33250-3

Features
specifications
Document
Industries
Methods
Spares and accessories
Related products

Features

  • Flash / No Flash & Ramp modes
  • Flash / No Flash & Ramp modes
  • Small sample size – 2 or 4 ml
  • Automatic flash detection
  • Automatic barometric correction
  • Electronic peltier cooling
  • USB port and result storage
  • Portable operation

specifications

TEMPERATURE RANGE 10 to 135 °C
CUP MATERIAL Corrosion Resisting Steel Insert
TEST MODES Rapid Equilibrium and Ramp
SAMPLE SIZE 2 ml for flash points up to 100 °C 4 ml for flash points above 100 °C
TEST DURATION 1 minute below 100 °C, 2 minutes above 100 °C, or user determined 1 to 99 minutes
RAMP RATE 2 °C/min ramp
HEATING AND COOLING SYSTEM Peltier Cell
POWER 200 W (maximum)
VOLTAGE 100/240 V, 50/60 Hz (switchable) 12 Vdc with optional power adaptor
GAS SUPPLY Laboratory gas, 3 kPa (0.44 psi) maximum pressure or Butane from optional Portable Gas Tank 13667-0
SIZE (HXWXD) 195 x 295 x 140 mm
WEIGHT 3 kg

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Setaflash SeSetaflash Series 3 ActiveCool Flash Point Tester – Corrosion Resistant Cup – 33250-3

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for 33250-3

Gas Tank – 30000-206

Gas tank for use with the Setaflash Series 3 and Series 8 Flash Point Tester range.

Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311

4 ml sample volume syringe, which must be used for flash points above 100 °C.

Silicone Rubber Tube 4 metres – 13730-005

Replacement gas tubing for use with Flash Point Testers.

Sample Well O-ring, Viton (Pack of 5) – 13740-004

Viton, 1/8th inch. Suitable for JET A1/Aviation fuels and kerosines. For use with Setaflash Series 3 Flash Point Testers or gas ignition Series 8 models, for temperatures up to 200 °C.

Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009

2 ml sample volume must be used for flash points under 100 °C and 2 ml sample volume is required for all FAME products at all temperatures.

Flash Detector Assembly – 13740-425

For use with the Setaflash Series 3 Flash Point Tester range.

Related products

Menu