.

PRODUCT

Setaflash Series 8 ActiveCool Flash Point Tester – Corrosion Resisting Cup – 82150-2

The Setaflash Series 8 ActiveCool closed cup flash point tester with corrosion resistant cup provides fast and reliable flash point results with a wide temperature range of -30 to 135 °C with no external cooling required.

With the Series 8, a test takes less than 2 minutes using just a 2 or 4 ml sample size. A simple user interface with colour digital display and touchscreen icons guides you through the straightforward testing process. For easy record keeping the instrument stores 100,000 test results which can be saved and transferred via a USB port.

Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.

Please note, 82150-2 is comparable to ASTM D3278, ASTM D7236, IP 524 and IP 534, however to be fully compliant a gas ignition should be used.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Setaflash Series 8 ActiveCool Flash Point Tester – Corrosion Resisting Cup – 82150-2

Features

  • Simple test procedure
  • Compact, rugged design
  • Electric ignition
  • Automated flash detection
  • Ramp mode for unknown samples
  • Automatic barometric pressure correction
  • Peltier heating and cooling
  • Fire detection (alarm and relay)
  • USB port and result storage

specifications

TEMPERATURE RANGE -30 to 135 °C
TEMPERATURE SELECTION °C or °F
IGNITOR Electric
HEATING/COOLING METHOD Peltier cell
TEMPERATURE RAMP MODE Automatic or custom settings (ramp rate up to 10 °C/min)
SAMPLE CUP MATERIAL Stainless steel insert
PRESSURE CORRECTION Automatic
DATA STORAGE 1 GB
VOLTAGE 110 to 250 Vac, 50/60 Hz
SIZE (HXWXD) 300 x 340 x 380 mm
WEIGHT 8 kg

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Setaflash Series 8 ActiveCool Flash Point Tester – Corrosion Resisting Cup – 82150-2

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for 82150-2

Printer Paper (Pack of 20) – 80602-001

Printer paper, pack of 20, for use with 80602-0 Serial Printer.

Flash Detector for Series 8 – 82000-201

Flash detector for use use with the Series 8 ActiveCool Flash Point Tester.

Sample Well O-ring, Viton (pack of 5) – 82150-001

Pack of 5 x 1/16th inch Viton O-rings, for use with the Setaflash Series 8 Flash Point Tester (82100-0 & 82150-0).

Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311

4 ml sample volume syringe, which must be used for flash points above 100 °C.

Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009

2 ml sample volume must be used for flash points under 100 °C and 2 ml sample volume is required for all FAME products at all temperatures.

Flash Detector for Series 8 – 82000-201

Flash detector for use use with the Series 8 ActiveCool Flash Point Tester.

Menu