Seta TOST Bath – 12 Way - 16640-2

PRODUCT

Seta TOST Bath – 12 Way – 16640-2

The Seta TOST Bath is a compact solid block bath which can accept up to 12 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.

The solid block bath can accept up to 12 sets of oxidation glassware. The layout of the heating elements give an even temperature distribution and the integral Setatemp 50K Temperature Controller ensures stability over extended test times. Safety features include over-temperature cut-out.

The Seta Oxflo Controller (supplied) comprises an inlet pressure regulator, pressure gauge and six precision flowmeters with tubes and floats calibrated for oxygen at 3 litres/hour, 21 °C and 0.4 bar pressure.

request a quote

Do NOT CHANGE OR REMOVE THIS ELEMENT

Seta TOST Bath – 12 Way – 16640-2

Spares and accessories

Features

12 positions
Dry block bath
Ambient to 100 °C temperature range
Integral Setatemp controller
Seta Oxflo Controller and flowmeters included

specifications

TEMPERATURE RANGE	Ambient to 100 °C
TEMPERATURE CONTROL AT 95 °C	Uniformity: ±0.1 °C Stability ±0.03 °C
BATH TYPE	Solid Block
POWER	2 kW
VOLTAGE	220/240 V, 50/60 Hz
SIZE (HXWXD)	Bath: 50 x 25 x 64 cm Oxflo Control Unit: 44 x 35 x 26 cm
WEIGHT	Bath: 110 kg Oxflo Control Unit: 11 kg
CCCN CODE	Tariff 90318080

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Seta TOST Bath – 12 Way – 16640-2

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for 16640-2

Silicon Carbide Paper P100 FEPA Grade (Pack of 50) – 11470-0

For use with Stanhope-Seta Corrosion, TOST, Robot and Oxi-Cor baths.

Pre-Formed Copper and Steel Catalyst Coil (pack of 6) – 16921-0

Pre-formed coils are supplied with a Material Certificate stating conformance to the relevant specification.

Steel Catalyst Wire (pack of 6) – 16920-0

6 x 3 metre lengths of standard catalyst wire, supplied with a Material Certificate stating conformance to the relevant specification.

Set Glassware ASTM D943, ASTM D4310, ISO 4263, IP 157 (6 cells) – 16911-0

Glassware to conform to ASTM D943 and D4310 test methods. Comprises 6 x glass condenser, test tubes, delivery tubes and interconnecting tubing.

Set Glassware ASTM D2274, D7462, ISO 12205, IP 388 (6 cells) – 16910-0

Comprises six each condensers, test tubes, delivery tubes and interconnecting tubing.

ASTM D943 & D4310 Accessory Pack – 16950-0

Supplied with;
1 x Thermometer bracket (not shown in image)
2 x Support rings
6 x Sampling tube holders
6 x Sampling tube spacers
6 x Stainless steel sampling tubes with Luer connector (one shown in image)
6 x Stoppers
6 x Oil level indicator strips (not shown in image)
6 x 10 ml syringes

Sample Filtering Kit for ASTM D2274 – 16914-0

Comprise:
– Filters
– Filter holder
– Vacuum flask
– Forceps
– Desiccator
– 0.8 micron 47 mm filters x 100
– Vacuum pump
– 250 ml beaker (graduated to 200 ml)
– Silicone tube

Analytical Balance – 99100-2

Rugged electronic balance with wide angle LCD display. The balance is equipped with filters to reduce vibration, and a glass enclosure with sliding doors on three sides for ease of access.

Laboratory Drying Oven – 99200-3

A digitally controlled oven suitable for heat storage, heat treatment and drying processes at temperatures up to 300 °C for timed periods up to 999 hours.

Thermometer for ASTM D943 & D4310 Oxidation Cell: Low Haz – 16980-2

A precision liquid in glass thermometer. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements