.
Tost Dry Block Bath – 6 Way with Oxflo – 16645-2
The Seta TOST Bath is a compact solid block bath which can accept up to 6 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.
Tost Dry Block Bath – 6 Way with Oxflo – 16645-2
Features
- 6 positions
- Dry block bath
- Ambient to 100 °C temperature range
- Integral Setatemp controller
- Seta Oxflo Controller and flowmeters included
specifications
| TEMPERATURE RANGE | Ambient to 100 °C |
|---|---|
| TEMPERATURE CONTROL AT 95 °C | Uniformity: ±0.1 °C Stability ±0.03 °C |
| BATH TYPE | Solid Block |
| POWER | 2 kW |
| VOLTAGE | 220/240 V, 50/60 Hz For 110 V contact Seta |
| SIZE (HXWXD) | Bath: 50 x 25 x 64 cm Oxflo Control Unit: 44 x 35 x 26 cm |
| WEIGHT | Bath: 80 kg Oxflo Control Unit: 11 kg |
| CCCN CODE | Tariff 90318080 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Tost Dry Block Bath – 6 Way with Oxflo – 16645-2
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 16645-2
Silicon Carbide Paper P100 FEPA Grade (Pack of 50) – 11470-0
For use with Stanhope-Seta Corrosion, TOST, Robot and Oxi-Cor baths.
Pre-Formed Copper and Steel Catalyst Coil (pack of 6) – 16921-0
Pre-formed coils are supplied with a Material Certificate stating conformance to the relevant specification.
Steel Catalyst Wire (pack of 6) – 16920-0
6 x 3 metre lengths of standard catalyst wire, supplied with a Material Certificate stating conformance to the relevant specification.
Set Glassware ASTM D943, ASTM D4310, ISO 4263, IP 157 (6 cells) – 16911-0
Glassware to conform to ASTM D943 and D4310 test methods. Comprises 6 x glass condenser, test tubes, delivery tubes and interconnecting tubing.
Set Glassware ASTM D2274, D7462, ISO 12205, IP 388 (6 cells) – 16910-0
Comprises six each condensers, test tubes, delivery tubes and interconnecting tubing.
ASTM D943 & D4310 Accessory Pack – 16950-0
Supplied with;
1 x Thermometer bracket (not shown in image)
2 x Support rings
6 x Sampling tube holders
6 x Sampling tube spacers
6 x Stainless steel sampling tubes with Luer connector (one shown in image)
6 x Stoppers
6 x Oil level indicator strips (not shown in image)
6 x 10 ml syringes
1 x Thermometer bracket (not shown in image)
2 x Support rings
6 x Sampling tube holders
6 x Sampling tube spacers
6 x Stainless steel sampling tubes with Luer connector (one shown in image)
6 x Stoppers
6 x Oil level indicator strips (not shown in image)
6 x 10 ml syringes
Sample Filtering Kit for ASTM D2274 – 16914-0
Comprise:
– Filters
– Filter holder
– Vacuum flask
– Forceps
– Desiccator
– 0.8 micron 47 mm filters x 100
– Vacuum pump
– 250 ml beaker (graduated to 200 ml)
– Silicone tube
Analytical Balance – 99100-2
Rugged electronic balance with wide angle LCD display. The balance is equipped with filters to reduce vibration, and a glass enclosure with sliding doors on three sides for ease of access.
Laboratory Drying Oven – 99200-3
A digitally controlled oven suitable for heat storage, heat treatment and drying processes at temperatures up to 300 °C for timed periods up to 999 hours.
Thermometer for ASTM D943 & D4310 Oxidation Cell: Low Haz – 16980-2
A precision liquid in glass thermometer. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements
Hot Plate – 25000-4
The Hot Plate is a compact, bench-top heat source designed for laboratory procedures that require precise temperature control.
Copper Catalyst Wire (Pack of 6) – 16930-0
3 metre lengths.
Standard wire lengths are supplied with a Material Certificate stating conformance to the relevant specification.
