.
Vibratory Sieve Shaker ANALYSETTE 3 PRO
The high performance Vibratory Sieve Shaker ANALYSETTE 3 PRO offers everything you need for fast determination of quantitative particle size distribution in the laboratory. As a shaking sieve system with an electromagnetic drive oscillates the sieve stack into regulated vertical oscillations, and is the ideal solution for sieving sample quantities up to 2 kg and a measurement range from 5 μm to 63 mm.
The ANALYSETTE 3 PRO is perfectly suited for fast quality control of incoming and outgoing products, offers user-friendly operation and is low-noise, robust and long-lasting. Perfect for quantitative particle size analysis of solids and suspensions of all kinds through dry or wet sieving with woven test sieves or micro precision sieving.
Our top model with automatic amplitude control, programme selection and the ability to be used as a calibratable and validatable test instrument in test equipment monitoring according to ISO 9001 and much more.
The ANALYSETTE 3 is a “shaking sieve” system in the classic sense in which an electromagnetic drive causes the sieves to oscillate in a vertical direction. The material to be sieved is periodically propelled upward off the sieve fabric and forced through the mesh of the attached test sieve as it falls back down.
Vibratory Sieve Shaker ANALYSETTE 3 PRO
Features
- Microprocessor control and digital display of all functions
- RS232 interface can control all functions – interface and AUTOSIEVE allow inspection of the sieving process via an online comparison of the set and actual amplitude
- AMPCONTROL for setting guaranteed constant amplitude meaning precisely reproducible sieving results in accordance with DIN 66165-1
- Programme selection for storing up to 10 individual sieve programmes
- Intermittent mode for sieving low density voluminous material reducing sieving time
- Micro-mode and micro-intermittent mode for micro precision sieving of fine materials 5 µm to 100 µm and small amounts of 0.05 – 0.5 g
- Energy-saving mode – the instrument switches automatically to standby
- Including FRITSCH warp-free EASYTWIST sieve stack tensioner
- Electric, easy-to-use sieve stack tensioning system TorqueMaster
- Intelligent wet sieving with wet sieving lid with 2 rotation nozzles
- Modular system for wide-ranging application options
- Convertible to Vibratory Micro Mill PULVERISETTE 0
- Optimum power consumption prevents warming up of the sieving system
- Sieving parameters are entered via ergonomically installed soft touchpad with digital display
- Up to 10 test sieves can be used simultaneously per working cycle – allowing up to 5 sieving operations to be performed at the same time
specifications
| Method of analysis | sieving |
|---|---|
| Sieving action | two-dimensional |
| Dry sieving | |
| Measuring range | 20 µm – 63 mm* |
| Max. sample quantity approx. | for sieves < 63 mm: up to 2 kg*for sieves < 100 µm: up to 100 g* |
| Sieving time approx. | 3 – 20 min* |
| Wet sieving | |
| Measuring range | 20 µm – 10 mm |
| Max. sample quantity approx. | 20 – 100 g* |
| Sieving time approx. | 30 – 60 min* |
| Micro precision sieving | |
| Measuring range | 5 µm – 100 µm |
| Max. sample quantity approx. | 0.05 – 0.5 g* |
| Sieving time approx. approx. | 30 – 60 min* |
| Further details | |
| Working principle | pressure |
| Sieve diameters | 100 mm, 200 mm or 8″ |
| Max. number of sieves per sieve stack | 10 (50 mm height), 16 (25 mm height) |
| Max. weight of sieve stack | 3kg |
| Max. height of sieve stack | 550 mm |
| Amplitude | 0.1 – 3 mm |
| Amplitude control | automatic |
| Automatic sieve analysis with evaluation software AUTOSIEVE | yes |
| Testing instrument calibration according to ISO 9001 | yes |
| Interface | yes |
| Memory for 10 parameter combinations | yes |
| Convertible to Vibratory Micro Mill PULVERISETTE 0 | yes |
| Electrical details | 100-240 V/1~ 50-60 Hz, 50-60 Hz, 50 Watt |
| Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be sieved and instrument configuration) | Approx. LpAd = 63 dB |
| Weight | 21 kg |
| Dimensions (W x D x H) | bench top instrument 37 x 40 x 20 cm |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
ANALYSETTE 3 PRO
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for ANALYSETTE 3 PRO
ACCESSORIES FOR DRY SIEVING
For observation of the sieving process, sieve clamping lids made of plexiglas are available for FRITSCH test sieves of 100 mm or 200 mm/8“ diameter. You also receive a clamping lid made of POM plastic (without window) to sieve materials for which metallic contamination must be avoided. Also available are corresponding sieve pans and sieves made of plastic. Sieve pans and interposed sieve pans for multiple sieving operations in a single process are available in stainless steel for all sieve sizes.
ACCESSORIES FOR WET SIEVING
During wet sieving with test sieves (200 mm/8“), the specially developed clamping lid with 2 rotation nozzles ensures an uniform spraying of the sieving material from above and an optimal sieving effect. Special interposed sieving rings with three nozzles are available for simultaneous spraying of the top and bottom sieves. A sieve clamping lid of plexiglas with 1 nozzle is also offered for wet sieving with 100 mm test sieves. The corresponding sieve pans with outlet are available for all sieve sizes. To prevent the occurrence of air cushions during wet sieving with test sieves < 100 µm FRITSCH offers special venting rings.
ACCESSORIES FOR MICRO-PRECISION SIEVING
With the micro-precision sieves, the ANALYSETTE 3 PRO is suitable for wet-sieving of fine materials from 5 μm to 100 μm and for smallest sample quantities from 0.05 – 0.5 g. The micro-precision sieves of pure nickel foil with a sieve diameter of 100 mm feature a large open sieving surface. Blockages are reliably prevented by the etched-in holes that widen toward the bottom. The matching clamping set, sieve clamping lid, sieve pan, sieve spacer and fast locking clamp along with the large sieve surface permit efficient sieving.
DUST EXHAUST SYSTEM
We offer the perfect dust exhaust and accessories with integrated channels for dust-free operation, simply connect the dust exhaust system and control it directly using the start and stop button on the instrument. The button lights up in green when the dust exhaust system is ready for operation.
CERTIFICATION
For certification of the ANALYSETTE 3 PRO as an inspection instrument, a 3.1 EN 10204 inspection certificate as well as a form for IQ/OQ documentation are available. A 3.1 EN 10204 inspection certificate is also offered for FRITSCH test sieves in accordance with ISO 3310-1.
SIEVING ACCESSORIES
We supply everything you need for sieving, like for example sieving aids, sieve covers and replacement seal rings. For dry sieving of materials with a high share of fine particles use 10 mm agate balls or 20 mm rubber balls should be used as sieving aids for medium and large sieves and 5 mm agate balls are utilized for fine sieves. Your advantage: They prevent clogging of the sieve mesh.
TEST SIEVES MADE OF STAINLESS STEEL, 200 MM DIAMETER, 50 MM HIGH ACCORDING TO ISO 3310-1
For dry and wet sieving with mesh widths from 20 μm to 63 mm: especially light, robust and manufactured in high quality. Highly alloyed stainless steel protects against corrosion and simplifies cleaning. Groove-free mesh transitions prevent contamination of the sieving material. Every sieve is laser-engraved, optically measured and delivered with a compliance certificate.
TEST SIEVES MADE OF STAINLESS STEEL, 8″ DIA., 2″ HEIGHT ACCORDING TO ASTM E11 MESH
For dry and wet sieving with mesh widths from 20 μm to 63 mm: especially light, robust and manufactured in high quality. Highly alloyed stainless steel protects against corrosion and simplifies cleaning. Groove-free mesh transitions prevent contamination of the sieving material. Every sieve is laser-engraved, optically measured and delivered with a compliance certificate.
MICRO-PRECISION SIEVES, FRAME MADE OF STAINLESS STEEL, SIEVE FOIL AND GRID MADE OF PURE NICKEL, 100 MM DIAMETER, ACCORDING TO ISO 3310-3
With the micro-precision sieves, the ANALYSETTE 3 PRO is suitable for wet-sieving of fine materials from 5 μm to 100 μm and smallest sample quantities from 0.05 – 0.5 g. The micro-precision sieves of pure nickel foil with a sieve diameter of 100 mm feature a large open sieving surface. Blockages are reliably prevented by the etched-in holes that widen toward the bottom. The matching clamping set, sieve clamping lid, sieve pan, sieve spacer and fast locking clamp along with the large sieve surface permit efficient sieving.
