Karl Fischer Moisture Titrator (Coulometric titration) [MKC-710D]

PRODUCT

Karl Fischer Moisture Titrator (Coulometric titration) [MKC-710D]

MKC-710D is a Karl Fischer Moisture Titrator equipped with data integrity support functions without a PC. Simultaneous measurement can be performed with up to two units and the large color LCD touch panel can be linked wirelessly. Your MKC-710M or MKC-710S can be upgraded to MKC-710D.

request a quote

Do NOT CHANGE OR REMOVE THIS ELEMENT

Karl Fischer Moisture Titrator (Coulometric titration) [MKC-710D]

Spares and accessories

Features

Dl support function
Large color TFT-LCD with a touch panel (8.4-inch)
The main control unit and a titrator are separately located by wireless (Bluetooth(R)).
Measurement results can be saved in PDF files.
The Water content can be displayed in real time.
Energy saving designed.
Maximum 2.6mgH₂O/min of electrolysis speed.

specifications

Type	Karl Fischer Moisture Titrator
Model	MKC-710D
Standard configuration	MCU-710D+MKC-710+Manual Solvent Change unit
Measuring method	Karl Fischer Coulometric titration
Measuring range	Water content : 1ug to 300mg (depends on reagent) Bromine index : 8ug to 300mg
Measurement cell	2-Component or 1-Component
Precision	Relative standard deviation : less than 0.3% (n=10) *Per KEM standard measurement conditions and standard liquids.
Display resolution	0.1ug.
Control method	Constant current pulse time control
Endpoint detection	Alternate current polarization method with a twin platinum electrode
EP sense method	Selective drift stability or limit measurement time
Required solvent	2-Component cell : Anolyte 100mL , Catholyte 5mL 1-Component cell : Anolyte 150mL
Key operation	Touch panel
Displays	1)8.4-inch color LCD 800 x 600 dots 2)English / Japanese / Mandarin Chinese 3)Simultaneous 2-channel display
Calculation	Concentration of water content, statistics data processing (mean, SD and RSD) and automatic averaging of blank value and factor value
Data storage	Method: 120 (per channel) Measurement results: 5,000 samples (per channel) Operation history: 100,000 (Total for 2 channels)
DI support function	Access Restrictions: Operator authentication by operator ID and password Rights Administration: Each operator is assigned to a specific right group Audit Trail: Operation history is automatically recorded Electronic Approval / Electronic Signature: Electronic approval and signature based on the workflow Backup / Restoration: Automatic backup with the predetermined period Archive / Archive View: Data storage. Archived data can be viewed on the main control unit Data Capacity: The remaining capacity can be checked any time via an icon on the main screen Security Setup: Password length and lockout settings can be set LIMS Connection: Data output to LIMS system
Extensibility	Measuring instrument : Karl Fischer Moisture Titrator (MKV-710/MKC-710) One of those instruments can be addedEvaporator ADP-611Multiple sample changer : CHK-501
External I/O	RS-232C port x4 : for Dot matrix printer , Electronic balance , Data Capture Software (SOFT-CAP) , Evaporator , Multiple sample changer USB ×1 : for USB flash drive , Thermal printer , A4 printer , Keyboard , Barcode reader , Foot switch , USB HUB LAN ×1 : for Personal computer (PC)
Ambient condition	1) Temperature : 5 to 35°C 2) Humidity : 85%RH or below (no condensation)
Power source	AC100 to 240V +/- 10% 50/60 Hz
Power consumption	Main unit:Approx. 30W
Dimensions	Touch panel controller : 225(W) x 190(D) x 42(H) mm Titration unit : 141(W) x 292(D) x 244(H) mm Stirrer : 107(W) x 206(D) x 340(H) mm (not incl. Solvent Change unit) Solvent Change Unit : 240(W) x 140(D) x 405(H) mm (not incl. tubing)
Weight	Touch panel controller : Approx.1.5kg Titration unit : Approx.3.0kg Stirrer : Approx.2.0kg Solvent Change Unit : Aprox.0.6kg
Conformity standard	CE marking EMC : EN61326-1 LVD : EN61010-1

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Karl Fischer Moisture Titrator (Coulometric titration) [MKC-710D]

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for [MKV-710D]

Software for Moisture Titrator [KF-Win]

KF-Win software enables your PC to control KEM’s Karl Fischer Moisture Titrators, MKV-710B, MKC-710B, MKC-520, MKA-520, MKS-520, MKC-510N, MKA-510N or MKS-510N. When it is connected to MKV-710B or MKC-710B, the functions equivalent to MKV-710M or MKC-710M will be available.

Show More Show Less

Analysis Software for Titration Results [Tview6]

This software allows to capture the data stored in the titrators (AT-710B,AT-700,MKA-610, MKC-610, AT-610 and AT-510) on a personal computer through CF memory card to manage/analyze titration results.

Show More Show Less