OmniaLabUP
The constant one.
For H2O pure type II.
OmniaLabUP is the system of choice when you need a constant supply of high-quality water in laboratories. For this, OmniaLabUP holds 100 litres of type II pure water in reserve in a storage tank with quality recirculation. It is an optimal supplier to autoclaves, lab rinsing machines and ultrapure water systems. The water produced conforms to international medical technology water standards such as ASTM, ISO 3696 and CLRW (CLSI).
Features
- OptiFill Dispenser is standard
- 100 l tank with quality recirculation and pressure outlet
- Tank volume display in percent
- Tank volume can be modularly increased
- Simple, cost-effective filter replacement
- Leakage sensor is standard
specifications
OmniaLabED+20 | OmniaLabED+40 | ||
---|---|---|---|
Pure Water Performance(l/h at 15 °C) | 20 | 40 | |
Conductivity(µS/cm) | 0.067 – 0,1 | 0.067 – 0,1 | |
Resistance(MΩ x cm) | 15 – 10 | 15 – 10 | |
Dispensing Performance Dispenser(l/min.) | up to 2 | up to 2 | |
Pure Water Tank Pressurized Outlet | optional | optional | |
Particles*(/ml) | < 1 | < 1 | |
Bacteria*(CFU/ml) | < 0.1 | < 0.1 | |
Feedwater Requirements |
|||
Softened or hardness-stabilized water according to DIN 2000 | |||
Feedwater Temperature(°C) | + 2 up to 35 | + 2 up to 35 | |
Manganese and Iron Content(mg/l) | < 0.05 | < 0.05 | |
Free Chlorine Content(mg/l) | < 0.1 | < 0.1 | |
Silt Density Index(SDI) | max. 3 | max. 3 | |
Technical Data |
|||
Operating Pressure(bar) | 2 – 6 | 2 – 6 | |
Supply Voltage(Volt/Hz) | 90-240/50-60 | 90-240/50-60 | |
Connected Load(kW) | 0.1 | 0.1 | |
Connector Size | 3/4″ | 3/4″ | |
Ambient Temperature | + 2 up to 35 °C | + 2 up to 35 °C | |
Dimensions Tower*(W x H x D mm) |
511 x 1520 x 575 | 511 x 1520 x 575 | |
Dimensions Base cabinet tank(mm) |
511 x 800 x 575 | 511 x 800 x 575 | |
Weight(kg) | 40 | 40 |
* With sterilizing filter 0.2 µm.
** With OptiFill Dispenser.
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for OmniaLabUP
Pre-treatment unit OmniaLab – 10“ (19200020)
UV tank disinfection unit 254 nm (19200050)
UV Flow through disinfection 254 nm (19200051)
External pressure booster pump SC 3000 (16561201)