.
AC9C Electrochemical sensor
Amperometric sensor with an array of 8 working electrodes and 1 common reference electrode made by thick film technology with integrated connector
The sensor is formed on a corundum ceramic base. On to this surface eight working electrodes, and the reference electrode are applied. The electrodes can be made of variety of materials (see below). At the end of the sensor there is an integrated connector. It is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. Different bio-chemically active substances can be immobilised on the working electrodes of the sensor.
AC9C Electrochemical sensor
Specifications
TEMPERATURE RANGE | 5 to 83 °C (-20 °C to 83 °C with optional cryostat 34006-3) |
---|---|
HEATING | Cartridge heaters |
POST TEST COOLING | Fan assisted or circulating liquid / external cryostat |
POST TEST COOL-DOWN TIME (80°C TO 50°C) | 45 minutes (fan) 3 minutes (external cryostat) |
IGNITOR | Quick-fit coaxial gas jet / electric hot wire, user selectable (electric hot wire pilot light for gas jet) |
TEMPERATURE PROBES | Class A platinum resistance thermometers |
STIRRER SPEED | 30 rpm |
GAS SUPPLY (GAS JET IGNITOR) | Laboratory gas, 3 kPa (0.44 psi) maximum pressure |
COOLING SUPPLY | Water (5 °C and above) Water / ethylene glycol 50/50 (below 5 °C) 125 kPa (18 psi) maximum pressure |
VOLTAGE | 110/120 V or 220/240 V, 50/60 Hz, (switchable) |
POWER | 600 W |
SIZE (HXWXD) | 380 x 470 x 340 mm |
WEIGHT | 13 kg |
CCCN CODE | Tariff 90268020 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–