.

PRODUCT

  1. Home
  2. chevron_right
  3. Products
  4. chevron_right
  5. Laboratory Supplies
  6. chevron_right
  7. Gas Generators
  8. chevron_right
  9. Nitrogen
  10. chevron_right
  11. Specialist Solutions
  12. chevron_right
  13. MS Bench (G) SCI 1

MS Bench (G) SCI 1

Developed exclusively for SCIEX, the MS Bench SCI range provides a modular workstation with provision for either integrated gas generation or a noise abating enclosure for roughing pumps. MS Bench SCI is designed specifically for use with the current and latest mass spectrometers at SCIEX*.

Two variants of the MS SCI Bench are available, both identical in form factor, aesthetics and work surface. MS Bench (G) SCI features a self-contained gas generator, providing a reliable and cost-efficient source of both nitrogen (Curtain Gas™) and clean, dry oil-free air for source and exhaust gas at flows and pressures configured to meet SCIEX instrument requirements (exuding IVD medical devices). The other variant, the MS Bench SCI, comes without the gas generator, instead providing a compartment below the bench, suitable for housing up to two MS roughing pumps.

*MS Bench (G) SCI 1 gas output is suitable for all instruments except IVD medical devices, all SCIEX Benchtop MS can be placed on MS Bench SCI 1. Vac Pumps for floor standing Triple TOFs can be placed inside MS Bench SCI 1.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Features

  • Designed exclusively for SCIEX to provide modular bench solution for all SCIEX LC-MS instruments*
  • Noise abated compartment suitable for housing vacuum pump(s) (non generator variant only)
  • ‘Genius Inside’: true plug & play gas generation (MS Bench (G) SCI 1 only).
  • No external compressed air source required.
  • Noise & vibration dampening, suitable for use as instrumentation bench CSA / FCC / CE compliant
  • Chemical-resistant phenolic resin worktop
  • Self-levelling castor wheels for seamless installation with existing lab bench system

*suitable for all current and latest MS from SCIEX including the new       5500+, but excluding IVD medical device instrument. Floor-standing Triple  TOFs can house vac pumps in MS Bench SCI.

specifications

Gas Type Nitrogen
Max Gas Flow 19L/min
Max Output Pressure 65psi/4.5bar
Gas Type Air
Max Gas Flow 26L/min
Max Output Pressure 100psi/6.9bar
Gas Type Air
Max Gas Flow 25L/min
Max Output Pressure 60psi/4.1bar

Site & Installation

Gas Outlets Fitting 3 x 1/4 ” BSPP
Power Consumption 1,100 VA
Voltage 220 – 240v ± 10% V
Frequency 50/60 Hz
Current 7 A
Heat output 3753 BTU
Max Operating Temp 30°C / 86°F
Particles <0.01µm
Phthalates None
Suspended Liquids None
Noise Level 59

Dimensions & weight

MS Bench Dimensions 01
Size (HxWxD) mm 762 x 914 x 787 mm
Size (HxWxD) Inches 30 x 36 x 31 inches
Generator Weight 160kg / 352lbs

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

MS Bench – Data Sheet

MS Bench – Brochure

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Menu