.

PRODUCT

  1. Home
  2. chevron_right
  3. Products
  4. chevron_right
  5. Laboratory Supplies
  6. chevron_right
  7. Gas Generators
  8. chevron_right
  9. Nitrogen
  10. chevron_right
  11. Specialist Solutions
  12. chevron_right
  13. MS Bench (G) SCI 2

MS Bench (G) SCI 2

Developed exclusively for SCIEX, the MS Bench SCI 2 range provides a modular workstation with provision for either integrated gas generation or a noise abating enclosure for roughing pumps. MS Bench SCI 2 is designed specifically for use with the SCIEX Triple Quad™ 7500 LC-MS/MS System– QTRAP® Ready.

Two variants of the MS Bench SCI 2 are available. MS Bench (G) SCI 2 features a self contained gas generator, providing a reliable and cost efficient source of both nitrogen (Curtain Gas™) and clean, dry oil-free air for source and exhaust gas at flows and pressures configured to meet SCIEX 7500 System requirements. The other variant, the MS Bench SCI 2, comes without the gas generator, instead providing a compartment below the bench, suitable for housing up to two MS roughing pumps.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Features

  • Designed exclusively for SCIEX to provide modular bench solution for SCIEX Triple Quad™ 7500 LC-MS/MS System– QTRAP® Ready
  • ‘Genius Inside’: true plug & play gas generation
  • No external compressed air source required
  • Noise & vibration dampening, suitable for use as instrumentation bench
  • Fan assisted cooling for vacuum pumps
  • Reclassifier vent preventing internal condensation (MS Bench (G) SCI 2 only)
  • CSA / FCC / CE compliant
  • Chemical-resistant phenolic resin worktop
  • Levelling castor wheels for seamless installation with existing lab bench system

specifications

Gas Type Nitrogen
Max Gas Flow 25L/min
Max Output Pressure 60psi/4.1bar
Gas Type Air
Max Gas Flow 26L/min
Max Output Pressure 105psi/7.2bar
Gas Type Air
Max Gas Flow 25L/min
Max Output Pressure 70psi/4.8bar

Site & Installation

Power Consumption 1,800VA
Voltage 220 – 240v ±10%
Frequency 50/60 Hz
Current 7 A
Heat output 3753 BTU/hr
Max Operating Temp 30°C / 86°F
Particles <0.01μm
Phthalates None
Noise Level 60

Dimensions & weight

SCI 2 Linedrawing
Size (HxWxD) mm 762 x 914 x 787 mm
Size (HxWxD) Inches 30 x 36 x 31 inches
Generator Weight 160kg / 352lbs

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

MS Bench SCI 2 – Data Sheet (Eng)

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Menu