The Seta Compact Cloud and Pour Point Cryostat has three 2 litre compartments which are independently temperature controlled and can accommodate four Air Wells. Each compartment has a temperature range of ambient to -34 °C. The lid is electrically heated to prevent the formation of ice and condensation. Refrigeration is accomplished by a two stage CFC free system.
| Temperature Range | Ambient to -34 °C |
|---|---|
| Compartment Volume | 2 litre |
| Cool Down Time (Single Compartment) | approx 1 hr (from 32 °C to -34 °C) |
| Refrigerant | CFC Free; Single Stage R452a |
| Voltage | 220/240 V, 50 Hz |
| Power | 750 W |
| Size (HXWXD) | 600 x 600 x 850 mm |
| Weight | 115 kg |
| Total Test Positions | 12 |
| CCCN Code | Tariff 84185019 |
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
Thermometer similar to ASTM61C: Low Haz with Works Certificate – ASTMST61C
A precision liquid in glass thermometer. Containing a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements. Solid stem, white backed, with an easy to read blue fluid and a round top finish.
Thermometer ASTMS5C: Low Haz with Certificate of Conformity – ASTMS5CX
A precision liquid in glass thermometer, manufactured in conformity with ASTM E2251. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements. Solid stem, white backed, with an easy to read blue fluid with a round top finish.
Thermometer: ASTM6C – IP2C with Certificate of Conformity – ASTM6CX
ASTM E1 Liquid-in-Glass Thermometer with toluene liquid.
Pressure Vessel – 11500-0
For copper & silver strip corrosion tests and for pour point tests. The test vessel is constructed from stainless steel, fitted with an O-ring seal and a screw-top closure. It is capable of withstanding maximum test pressure of 700 kPa (100 psi).
For use with Seta Cloud and Pour Point Bath (11010-2), Seta Copper Corrosion Block Bath (11310-0), Seta Cloud and Pour Point Cryostat (93531-8), Seta Compact Cloud and Pour Point Cryostat (94100-3) and Seta Oxi-Cor Bath (15550-3).
Insulating Disc (Pack of 20) – 11000-004
For use with Seta Cloud and Pour Point Cryostat (93531-7) and Seta Compact Cloud and Pour Point Cryostat (94100-3).
Insulating Gasket (Pack of 20) – 11000-003
For use with Seta Cloud and Pour Point Cryostat (93531-7) and Seta Compact Cloud and Pour Point Cryostat (94100-3).
Graduated Jar and Cork (Pack of 10) – 11000-002
Thermometer: Cork for Jar – 93531-202
Thermometer for use with the Seta Cloud and Pour Point Cryostat (93531-8) and the Seta Compact Cloud and Pour Point Cryostat (94100-3).
Brass Air Well (Pack of 4) – 93531-201
Brass air well for use with Seta Cloud and Pour Point Cryostat (93531-8).
MTVM – Gas Oil 500 ml – 99851-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Note: Each MTVM sample provides a single value for all parameters, shown below with nominal values stated.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Multi Test CRM – Gas Oil 500 ml – SP9000-0
Multi Test Certified Reference Material’s (MTCRM) are premium level, dual certified reference materials. Certified in accordance with ISO 17025 and ISO 17034 under UKAS accreditation. They provide both calibration and verification options for laboratory test equipment, from the same sample. With their values certified to the highest level of accreditation and integrity, available globally.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a certificate which gives the certified value for each test method covered by the material.
MTVM – Fuel Oil 500 ml – 99852-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.
