The Seta Corrosion Test Bath is a stainless steel water bath which accommodates up to 3 pressure vessels. Fitted with heater and thermostatic temperature controller with integral circulator and LED display.
Seta Corrosion Test Bath – 22220-5
Seta Corrosion Test Bath – 22220-5
Features
- Temperature range ambient +5 °C to 120 °C
- Stainless steel water bath which accommodates up to 3 pressure vessels
- Fitted with heater and thermostatic temperature controller with integral circulator and LED display
specifications
TEMPERATURE RANGE | Ambient +5 °C to 120 °C |
---|---|
STABILITY | ± 0.2 °C |
CAPACITY | 38 litres |
VOLTAGE | 110/120 V, 50/60 Hz 220/240 V, 50/60 Hz |
POWER | 1.4 kW |
SIZE (LXWXD) | 9.5 kg |
WEIGHT | 30 rpm |
GAS SUPPLY (GAS JET IGNITOR) | Laboratory gas, 3 kPa (0.44 psi) maximum pressure |
COOLING SUPPLY | Water (5 °C and above) Water / ethylene glycol 50/50 (below 5 °C) 125 kPa (18 psi) maximum pressure |
VOLTAGE | 110/120 V or 220/240 V, 50/60 Hz, (switchable) |
POWER | 600 W |
SIZE (HXWXD) | 380 x 470 x 340 mm |
WEIGHT | 9.5 kg |
CCCN CODE | Tariff 84198998 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 22220-5
Bath Oil 80 – 120 °C (20 litres) – 94635-0
Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids in dissipation of bubbles.
Copper Corrosion Kit LPG – 11512-0
The Copper Corrosion Kit comprises all of the accessories required to carry out tests on LPG to ASTM D1838, IP 411 and EN ISO 6251. Quantities are sufficient for running two tests simultaneously.
Bath Oil 40 – 85 °C (20 litres) – 94633-0
Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids in dissipation of bubbles.
Silicon Carbide Grains 150 Mesh 500 g (Pack of 5) – 11480-0
Silicon-carbide powder of 105 µm (150 mesh) as defined by the Federation of European Producers of Abrasives (FEPA).
Silicon Carbide Paper, 65 micron, P240 FEPA Grade (Pack of 50) – 11460-0
For use with;
Seta Cu-Ag Corrosion Bath (11300-2)
Seta Copper Corrosion Block Bath (11308-0)
Seta Oxi-Cor Bath (15550-3)
Copper Strip Corrosion Test Vessel (22150-5)
Seta Corrosion Test Bath (22220-5)
Copper Test Strip (pack of 30) – 22190-0
Finished to 75 x 12.5 x 2.4 mm with 3.0 mm hole for suspension. Ready for final polish according to the test method. Supplied in pack of 30 strips.