Seta AutoRobot Pressure Monitoring System – 15205-2
Provides two independent channels of automated pressure monitoring and end…
Show .
Seta RoBot Bath – 15200-5
The Seta RoBot Bath is a floor standing unit, used for the evaluation of oxidation stability of new and in-service engine, turbine and insulating oils in the presence of water and a copper catalyst.
Up to two RoBot Oxidation Vessels (15210-5) are supported at an angle of 30° in an oil bath, and rotated at 100 rev/minute by an electric motor and bevel gear drive.
The 72 litre oil bath is digitally temperature controlled. A hinged hood, fitted with a safety interlock that switches off the motor when opened to protect the operator from the rotating test vessels. The bath is equipped with low fluid level and over-temperature protection devices. Extraction fans remove silicone oil vapours and fumes from the bath.
Seta RoBot Bath – 15200-5
Features
- Ambient to 160 °C
- Two test stations
- Fume extraction
- Gear drive
- Optional pressure monitoring
specifications
| TEMPERATURE RANGE | Ambient to 160 °C |
|---|---|
| TEMPERATURE STABILITY | ±0.1 °C |
| BATH CAPACITY | 72 litres |
| BATH FLUID | Silicone Oil |
| NUMBER OF VESSELS | 2 |
| ROTATIONAL SPEED | 100 rev/min |
| VOLTAGE | 220/240 V, 50 Hz 220/240 V, 60 Hz |
| POWER | 3.2 kW |
| SIZE (HXWXD) | 113x78x88 cm |
| WEIGHT | 87 kg |
| CCCN CODE | Tariff 90269000 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Seta RoBot Bath – 15200-5
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 15210-5
Silicon Carbide Paper P100 FEPA Grade (Pack of 50) – 11470-0
For use with Stanhope-Seta Corrosion, TOST, Robot and Oxi-Cor baths.
Glass Liner and PTFE Disk – 15220-0
Borosilicate glass vessel, stainless steel spring and two different PTFE lids. For ASTM D2272 and IP 229. One required for each pressure vessel.
For use with the Seta RoBot Bath (15200-5).
For use with the Seta RoBot Bath (15200-5).
Seta Spanner and Bench Plate – 15211-3
For use with RoBot Oxidation Vessel (15210-5).
Pre-Formed Copper Catalyst Coil (pack of 6) – 16931-0
Pre-formed coils are supplied with a Material Certificate stating conformance to the relevant specification.
Silicone Bath Oil 120 – 150 °C (20 litres) – 94632-0
Seta bath fluids are formulated to maximise the heat stability and efficiency of Seta baths. The low viscosity reduces formation and aids in dissipation of bubbles.
RoBot Oxidation Vessel – 15210-5
For use with the Seta RoBot Bath (15200-5).
Catalyst A for ASTM D4742 – 16932-0
TFOUT IIID catalyst, suitable for approximately 39 tests.
Charging and Calibration Kit – 15460-2
Includes 2 charging leads and pressure gauge.
For use with the Seta RoBot Bath (15200-5).
Seta AutoRobot Pressure Monitoring System – 15205-2
Provides two independent channels of automated pressure monitoring and end point detection.
For use with the Seta RoBot Bath (15200-5).
Copper Catalyst Wire (Pack of 6) – 16930-0
3 metre lengths.
Standard wire lengths are supplied with a Material Certificate stating conformance to the relevant specification.
Nylon Bearing (Pack of 2) – 15200-308
Nylon Bearing for use with the Seta RoBot Bath (15200-5).
Thermometer Digital: Precision -199 to 199 °C – 51000-0
A general purpose thermometer with excellent precision and fast response time. Compact design, response and traceable calibration in accordance with ASTM E1137 and ASTM E2877 specifications. Ideal for general purpose checks of temperature accuracy and calibration.