Micro Carbon Residue Tester - 97400-3

.

PRODUCT

Micro Carbon Residue Tester – 97400-3

The Micro Carbon Residue Tester is an automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum products.

The digitally controlled furnace has a temperature range of ambient to 500 °C. Temperature, flow and pressure values are automatically controlled and values are displayed on the control panel. The test cycle includes an audible ‘end of test’ alarm.

Includes: one six place holder for 16 ml sample tubes and one 12 place holder for 2 ml or 4 ml sample tubes (for sample tubes see Accessories).

request a quote

Do NOT CHANGE OR REMOVE THIS ELEMENT

Micro Carbon Residue Tester – 97400-3

Spares and accessories

Features

Carbon residue range 0.1% to 30.0% (m/m)
12 sample capacity
Automatic temperature ramp and gas control
Digital display flowmeter
Equivalent to ASTM D189; IP 13
Temperature range ambient to 500 °C

specifications

TEMPERATURE RANGE	Ambient to 500 °C ±2 °C
RAMP RATE	10 to 15 °C/minute
THERMOCOUPLE	Iron – constanton
PRESSURE CONTROLLER	20 to 750 kPa
PRIMARY PRESSURE	1400 kPa max
FLOWMETER	0.1 to 1 litre/min
FLOW RATE	Automatic, 150 ml/min or 600 ml/min
CONSUMPTION	Approx. 40l/N2 per test
POWER	1.6 kW
VOLTAGE	220/240 Vac, 50/60 Hz Or 220/240 Vac 60 Hz
SIZE (HXWXD)	46 x 35 x 39 cm
WEIGHT	21 kg
CCCN CODE	Tariff 90268020

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Micro Carbon Residue Tester – 97400-3

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for 97400-3

Sample Tube 4 ml (pack of 100) – 97403-0

Pack of 100 x 4 ml sample tubes for ISO 10370.

Glass Sample Tube 16 ml (pack of 100) – 97402-0

Pack of 100 x 16 ml glass sample tubes.

Glass Sample Tube 2ml (pack of 100) – 97401-0

Pack of 100 x 2 ml glass sample tubes.

Micro Carbon Residue Tester Oven Lid – 97400-310

Oven lid for use with the Micro Carbon Residue Tester 97400-3.

Condensate Trap (pack of 2) – 97400-302

Pack of 2 condensate traps for use with the Micro Carbon Residue Tester (97400-3).

Flow Verification Kit – 97450-0

The Flow Verification Kit is used with the Micro Carbon Residue Tester (MCRT) (97400-3), to enable the user to verify the flow rate of nitrogen during the test stages.