.

PRODUCT

  1. Home
  2. chevron_right
  3. Products
  4. chevron_right
  5. Laboratory Supplies
  6. chevron_right
  7. Sample Preparation
  8. chevron_right
  9. Miling
  10. chevron_right
  11. Disk mills
  12. chevron_right
  13. Disk Mill PULVERISETTE 13 classic line

Disk Mill PULVERISETTE 13 classic line

The especially heavy and solid FRITSCH Disk Mill PULVERISETTE 13 classic line is the ideal instrument for fine grinding of up to 150 kg per hour of hard-brittle and medium-hard solids – even in continuous operation. The maximum feed size per piece is approximately 20 mm edge length, the final fineness is freely adjustable between 12 mm and 0.1 mm.

The material to be ground is comminuted by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. The ground material automatically falls down through a pre-set grinding gap into the collection drawer. The desired final fineness can be defined from the outside by changing the gap width.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Features

  • Precise gap adjustment with an accuracy of 0.1 mm
  • Fast, easy cleaning
  • Simple operation
  • Fast grinding disk change
  • Precision setting of the final fineness even during grinding
  • High service life due to generously dimensioned bearings
  • Especially safe due to central tension lock of the grinding chamber
  • Easy gap width check from the outside
  • Combinable with the Jaw Crusher PULVERISETTE 1 classic line

specifications

Working principle shearing
Optimal for material type very hard, hard-abrasive, hard-brittle, medium-hard samples and for metal-free grinding
Grinding tools fixed and movable grinding disk
Materials of the grinding tools hardened steel cast, manganese steel, hardmetal tungsten carbide, zirconium oxide
Min. sample quantity 20 – 30 ml
Max. feed size(depending on the material) 20 mm
Max. throughput (depends on material) 150 kg/h
Final fineness 0.1 – 12 mm
Feeding batchwise/ continuous
Rotating speed grinding disk 440 rpm
Bearings needle and double row angular contact ball bearings
Electrical Details*(Other voltages on request) 400 V/3~, 50 Hz, 1790 Watt
Instrument also available in the following voltage 200 V/3~, 60 Hz, 2100 Watt
order no. 13.3020.00
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground) Approx. LpAd = 70 dB
Weight  140 kg
Dimensions (W x D x H) bench top instrument 44 x 87 x 40 cm

The three-phase AC version„/3~“ is definitely preferable over a single-phase version „/1~“, since you obtain with the three-phase AC version more power, better effectiveness and a greater energy efficiency.

Please note: the three-phase AC version „/3~“ must always be operated on a three-phase supply network.

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Disk Mill PULVERISETTE 13 classic line

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for Disk Mill PULVERISETTE 13 classic line

GRINDING DISKS

Please select at least one fixed and one movable grinding disk which are available in various materials.
Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, minerals, etc. and never for hard-tough samples, such as metals.

ACCESSORIES FOR METAL-FREE GRINDING

For completely metal-free grinding of hard-brittle and medium-hard solid samples, for example for dental ceramics, we can equip your FRITSCH Disk Mill PULVERISETTE 13 classic line with a thorough polymer interior coating – together with grinding disks made of zirconium oxide – an absolutely reliable protection against iron contamination..

CERTIFICATION

IQ/OQ documentation for the independent utilization for the support of instrument qualification in the quality management system for the Disk Mill PULVERISETTE 13 premium line.

DUST EXHAUST SYSTEM

The connecting piece for a dust exhaust system really simplifies the automatic removal of fine dust occurring during grinding and is even an optimal aid for cleaning the grinding parts..

ACCESSORIES FOR COMBINATION OF JAW CRUSHER AND DISK MILL

For fast, continuous pre- and fine-grinding particularly of large quantities of coarse material, the combination of the Disk Mill PULVERISETTE 13 classic line and the Jaw crusher PULVERISETTE 13 classic line is the ideal solution. Mounted together onto a rack and connected to each other by a chute, they automatically grind the material from a particle size of up to 95 mm to a final fineness of down to 100 μm – fast, easy and effective in a single step!

Menu