Jaw Crusher – Model II PULVERISETTE 1 classic line
The compact FRITSCH Jaw Crusher PULVERISETTE 1 classic line is the ideal…
Show .
Jaw Crusher PULVERISETTE 1 premium line
The extra powerful FRITSCH Jaw Crusher PULVERISETTE 1 premium line with its up to 3 kW drive power ensures an exceptionally high throughput and is the ideal instrument for fast and effective pre-crushing – batchwise or continuous – of hard or very hard brittle materials even hardest ferrous alloys!
The FRITSCH Jaw Crusher PULVERISETTE 1 premium line is ideal for a max. feed size of 95 mm and a max. continuous throughput of up to 250 kg/h depending on the material and gap setting.
The powerful comminution of the sample takes place in the Jaw Crusher under high pressure between one fixed and one movable crushing jaw in an enclosed grinding chamber. The gap adjustment is defined with millimetre accuracy from the outside, simply by adjusting the distance between the crushing jaws. The ground sample automatically falls downward – into a drawer for batchwise comminution or via a chute into a larger collection container for continuous operation or directly into a FRITSCH Disk Mill PULVERISETTE 13 premium line for further comminution.
Jaw Crusher PULVERISETTE 1 premium line
Features
- Feed size up to 95 mm – max. continuous througphut 250 kg/h
- Extra powerful motor with up to 3 kW drive power
- Outstanding noise reduction due to side walls insulated with foam for a significantly quieter operation
- Especially safe as drawer and grinding chamber lid lock automatically
- Funnel folds away completely providing easy access and easy to fill
- Freely accessible grinding chamber
- Clean Design: smooth surfaces in the grinding chamber enable easy cleaning and prevent cross-contamination
- Extremely heavy-duty plexiglas cover for visual inspection of grinding chamber
- Automatic adjustment of correct direction of rotation – optimal results for three-phase versions
- Zero-point adjustment can be calibrated: compensation of wear of crushing jaws, precise re-adjustment after turning/ replacing crushing jaws
- Progressive gap adjustment: zero point adjustment can be calibrated is connected with a progressive grinding gap adjustment.
- Extra low noise and dust-free operation
- Lateral support walls especially easy to replace, crushing jaws easily removable
- Combinable with the Disk Mill PULVERISETTE 13 premium line
specifications
| Working principle | pressure |
|---|---|
| Optimal for material type | very hard, hard, medium-hard, brittle and abrasive samples and for metal-free grinding |
| Grinding tools | fixed and movable crushing jaws |
| Materials of the grinding tools | hardened steel, stainless steel, chromium-free tool steel, manganese steel, hardmetal tungsten carbide, zirconium oxide |
| Min. sample quantity | 20 ml |
| Max. feed size | 95 mm |
| Max. continuous throughput (depends on material and gap width) | 250 kg/h |
| Final fineness | 0.3 – 15 mm |
| Feeding | batchwise/continuous |
| Eccentric oscillations | 308 movements/min |
| Electrical Details*(other voltages available on request) | 400 V/3~, 50/60 Hz, 3490 Watt |
| Instrument also available in the following voltage | 200 V/3~, 50/60 Hz, 3490 Watt – order no. 01.2040.00 |
| Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be crushed) | approx. LpAd = 83 dB |
| Weight | 320 kg |
| Dimensions (W x D x H) | table-mounting or on stand 60 x 70 x 58 cm |
*The three-phase AC version„/3~“ is definitely preferable over a single-phase version „/1~“, since you obtain with the three-phase AC version more power, better effectiveness and a greater energy efficiency.
Please note: the three-phase AC version „/3~“ must always be operated on a three-phase supply network.
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Jaw Crusher PULVERISETTE 1 premium line
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for PULVERISETTE 1 premium line
FIXED AND MOVABLE CRUSHING JAWS AND LATERAL SUPPORT WALLS
Normally, crushing jaws and support walls of the same material are used. For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.
For complete metal-free pre-crushing of medium-hard, brittle samples, for example in the ceramics industry, we can equip your PULVERISETTE 1 premium line with crushing jaws made of zirconium oxide, lateral support walls made of POM plastic or zirconium oxide and a special polyamide-coated funnel and drawer – other coatings available on request.
DUST EXHAUST SYSTEM
We offer the perfect dust exhaust and accessories with integrated channels for dust-free operation, simply connect the dust exhaust system and control it directly using the start and stop button on the instrument. The button lights up in green when the dust exhaust system is ready for operation.
ACCESSORIES FOR COMBINATION OF JAW CRUSHER AND DISK MILL
For especially fast continuous premium pre- and fine-grinding of large quantities of coarse material, the combination of the Jaw Crusher PULVERISETTE 1 premium line and the Disk Mill PULVERISETTE 13 premium line is the solution: they form an efficient, heavy-duty, high-performance grinding instrument with integrated Riffle Sample Splitter. This gives you the full range of opportunities for sample preparation with a feed size of up to 95 mm and final fineness of down to 0.05 mm.
The combined FRITSCH premium high-performance grinding instrument can also be configured for completely metal-free pre- and fine-grinding.
Jaw Crusher – Model I PULVERISETTE 1 classic line
The compact FRITSCH Jaw Crusher PULVERISETTE 1 classic line is the ideal…
Show