.

PRODUCT

  1. Home
  2. chevron_right
  3. Products
  4. chevron_right
  5. Laboratory Supplies
  6. chevron_right
  7. Titration
  8. chevron_right
  9. Automatic Titrator
  10. chevron_right
  11. AT 710
  12. chevron_right
  13. Automatic Potentiometric Titrator [AT-710S]

Automatic Potentiometric Titrator [AT-710S]

Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry.
Monitoring temperature during titration ensures safe measurements.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Features

  • Titrant Information is stored in an IC chip in the burette unit (Smart burette)
  • Information stored in the electrode cable (Smart electrode)
  • New burette unit
  • Large color TFT-LCD with a touch panel(8.4-inch)
  • Two different user levels and permisions
  • Two different potentials , such as pH/ transmittance , pH/ conductivity or pH/ temperature can be logged simultaneously.
  • Monitoring temperature during titration ensures safe measurements
  • Measurement results are converted to PDF and can be stored in a USB flash drive

specifications

Type Automatic Potentiometric Titrator
Model AT-710S
Product configuration MCU-710S + AT-710 + IDP-100 + Propeller stirrer
Detection range 1) Potentiometric : -2000mV to +2000mV

2)pH :-20.000 to 20.000pH

3)Temp. : 0 to 100°C

Titration mode Auto Titration , Auto Intermit , Intermit , Stat , Petroleum Titration , COD
Method Standard method 120 , Combined method 10 (Max 5 methods can be linked)
Kinds of titration Potentiometric (acid/base , redox , precipitation) , Photometric , Polarization , Conductivity
Titration form Full titration (Auto EP detection) , EP Stop , Level Stop , Intersect , EP Stop/Level Stop
Special application Measurement of electrode potential (pH , potential) , Acid dissociation constant (pKa)

Simultaneous recording of 2-way input potential (e.g. Titer vs. pH+%T , Titer vs. pH+μS) , Learn

Key operation Touch panel
Displays 1) 8.4-inch color LCD 800 x 600 dots

2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish / German / French

3) 1-channel display

Calculation Concentration of content , statistics data processing (mean , SD and RSD) and automatic averaging of blank and factor value
Data storage 500 samples
GLP conformance Registration of operator / User group administration Titrant : Reminder of date of factor measurement / Alarm to indicate remaining reagent / Reminder of piston replacement date / Reminder of reagent replacement date / History of factor measurement

 

Check performance :Reminder of scheduled checkdate / Record of check results

 

Management of electrode : Reminder of calibration date / Record of calibration history / Electrode check / History of electrode check

 

Verification of burette capacity : Verification of burette capacity

 

Management of conduction time : Display of operating time

Burette size 20mL glass burette with brown cover (Standard)
Optional burette units : 10mL , 5mL , or 1mL
Burette accuracy 50mL burette(Auto dispenser) +/- 0.5mL
20mL burette +/- 0.02mL ; reproducibility +/- 0.01mL
10mL burette +/- 0.015mL ; reproducibility +/- 0.005mL
5mL burette +/- 0.01mL ; reproducibility +/- 0.003mL
1mL burette +/- 0.005mL ; reproducibility +/- 0.001mL
Preamplifier 1) STD:pH (mV) and mV , 2 inputs (Standard)

2) PTA:pH (mV) , mV and photometric , 3 inputs

3) POT:pH (mV) , mV and polar , 3 inputs

4) CMT:pH (mV) , mV and conductivity ,3 inputs (factory setting required)

5) TET:pH (mV) 2 ways and mV , inputs (factory setting required)

External I/O RS-232C port x3 : for Dot matrix printer/Electronic balance/Data Capture Software (SOFT-CAP)

SS-BUS x1 : for Multiple sample changer , APB

ELE. x1 : for Smart electrode

USB x1 : for USB flash drive , Thermal printer , A4 printer , Keyboard , Barcode reader , Foot switch , USB HUB

TEMP.COMP. x1 : Input terminal for temperature sensor to correct reagent volume , sensor Pt100 , temperature reading accuracy : +/- 0.5°C (burette 1 only)

Extensibility
Ambient condition 1) Temperature:5 to 35°C

2) Humidity:85%RH or below (no condensation)

Power source AC100 to 240V +/- 10% 50/60 Hz
Power consumption Main unit : Approx. 30W

Printer : Approx. 7W

Dimensions Touch panel controller : 225(W) x 190(D) x 42(H)mm

Titration unit : 141(W) x 296(D) x 367(H)mm (not incl. tubing)

Printer : 106(W) x 180(D) x 88(H) mm

Weight Touch panel controller : Approx. 1.5kg

Titration unit : Approx. 4.0kg

Printer: Approx. 0.4kg

Conformity standard CE marking EMC : EN61326-1 LVD : EN61010-1 RE Directive
Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Automatic Potentiometric Titrator [AT-710S]

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Spares and accessories for AT-710S

Software for Automatric Potentiometric Titrators [AT-Win]

AT-Win software enables your PC to control KEM’s Automatic Potentiometric Titrators
e.g., AT-710B, AT-700, AT-510 or AT-500N.

Analysis Software for Titration Results [Tview6]

This software allows to capture the data stored in the titrators (AT-710B,AT-700,MKA-610, MKC-610, AT-610 and AT-510) on a personal computer through CF memory card to manage/analyze titration results.

Data Acquisition Software [SOFT-CAP]

This software allows to capture the data stored in the titrators (AT-710B,AT-700,MKA-610, MKC-610, AT-610 and AT-510) on a personal computer through CF memory card to manage/analyze titration results.

Multiple Sample Changer [CHA-700]

6 or 11 samples can be loaded for continuous measurement with connection of AT-710M

, AT-710S , AT-710B and AT-700 Automatic Potentiometric titrator.

Multiple Sample Changer [CHA-600]

Allow to measure 12 or 18 samples in succession.
Sample changer exclusive for AT-710M , AT-710S , AT-610 and AT-510 titrators.

Piston burette [APB-610]

Allow to measure 12 or 18 samples in succession.
Sample changer exclusive for AT-710M , AT-710S , AT-610 and AT-510 titrators.

Electrodes

For aqueous, non aqueous, acid-base, redox, polarization titration and chelate titration.

Propeller Stirrer

This option is attached to either a magnetic stiller stand or titration
stand for use.

Menu