.
Xenon Light Sources
Xenon light sources offer very high intensity in the UV and are useful for absorbance, fluorescence or reflectance measurements. Pulsed xenon sources are high intensity with a lower duty cycle, making them ideal for measurements where high intensity UV light can damage the sample.
Standard and high power output options are available.
Ocean Insight xenon sources have an SMA 905 output connector and seamlessly integrate with our fiber optic spectrometers and accessories, including optical fibers, cuvette holders, probes and other sampling optics.
Xenon Light Sources
Features
- Wavelength coverage
- High power option
- Pulse-to-pulse stability
- Adjustable flash rate
- Simple experiment setup
specifications
Subject to change depending on model type
Engineering: |
|
|---|---|
| Average Output Power | 9.9 W |
| Nominal Bulb Power | 35 W, 75 W |
| Source | Continuous Xenon, HPX-2000 Xenon Light Source, Pulsed Xenon |
| Typical Output Power | 1.52 mW, 6.13 mW |
| Wavelength Range | 185nm – 2μm |
| Pulse Duration | 5 μs (at 1/3 height of pulse) |
| Pulse Power | 45 microjoules/pulse (maximum) |
| Pulse Rate | Multiple mode: up to 220 Hz Single mode: 1 – 220 Hz |
| Source Lifetime | 1,000 hours, 10⁹ pulses (estimated 230 days continuous operation @ 50 Hz pulse rate) |
| Warm-up Time | 25 minutes, 30 minutes, None |
Environmental: |
|
| Safety & Regulatory | CE, VDI/VDE 0160, EN 61010, CE, VDI/VDE 0160, EN 61011 |
| Operating Humidity Specification | 5-95% without condensation at 40°C |
| Operating Temperature | 5°C – 35°C |
Physical: |
|
| Fiber Connector | SMA 905 |
| Shutter | Yes |
| Dimensions | 14 cm x 10.5 cm x 4 cm, 14.5 x 16.5 x 26 cm |
| Integrated Filter Holder | No, Yes |
| Power Consumption | 1.3 A @ 11V @ 220 Hz, 100 mA @ 12V @ 10Hz, 105 W, 50 W |
| Power Requirements | 85-264 V, 50/60 Hz |
| Trigger/Shutter Input Connection | SUB-D-15 pin |
| Trigger/Shutter Input Signal | TTL; 1-220 Hz, TTL; Up to 2.5 Hz maximum |
| Weight | 0.4 kg, 6 kg |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
