.

PRODUCT

HR-4UVV250

400 Lines Blazed at 250 nm.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Specifications

Entrance Slit HR-4UVV250-5 HR-4UVV250-10 HR-4UVV250-25 HR-4UVV250-50 HR-4UVV250-100 HR-4UVV250-200
Optical and Spectroscopic
Wavelength Range
(configuration-dependent)
220-880
Resolution  0.4 0.74 0.88 1.48 2.8 5.36
Integration Time 3.8 ms-10 s
OSF Y
Dynamic Range 1300:1
Signal-to-Noise (per second with High Speed averaging mode) 3000:1
Signal to Noise

(Single scan @ 10 ms)

250:1
Optical Resolution (FWHM) <1.0 nm w/25 μm slit (configuration-dependent)
Scan rate (type)² 74 Hz
Thermal Wavelength Drift 0.02 nm/° C
Triggering Software, External rising edge, External level
Wavelength Range (beginning/
ending wavelengths may vary marginally)
220-1050 nm
Detector
Active Pixels 3648
Corrected Linearity 99.70%
Electrical
Connectors USB Type-C, SMA, TFM-108-02-L-DH, RS-232
USB Type-C Ratings: VCC Minimum 4.40V, Nominal 5V, Maximum 5.25 V
IO Standard 3.3V CMOS
Absolute Maximum Ratings:
Voltage on any pin (other than input power)
5V
Interface USB 2.0 High Speed
External Triggering Jitter 21 ns
Mechanical
Physical Dimensions 148.8 x 106.4 x 48.2 mm
Weight 931 g
Input Fiber Connector SMA 905
Environmental
Temperature (operation) 0 °C – 55 °C
Temperature (storage) -30 °C to 70 °C
Humidity <85%

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

HR Series – Manual

HR Series – Product Sheet

Industries

show DATA — DO NOT CHANGE ID–

Menu