.
HR-6UV240
2400 Line Holographic.
Specifications
| Entrance Slit | HR-6UV240-5 | HR-6UV240-10 | HR-6UV240-25 | HR-6UV240-50 | HR-6UV240-100 | HR-6UV240-200 |
| Optical and Spectroscopic | ||||||
| Wavelength Range (configuration-dependent) |
185-280 | |||||
| Resolution | 0.075 | 0.1 | 0.125 | 0.21 | 0.4 | 0.77 |
| Integration Time | 7.2 ms-5 s | |||||
| OSF | N | |||||
| Dynamic Range | 12000:1 | |||||
| Signal-to-Noise (per second with High Speed averaging mode) | 3500:1 | |||||
| Signal to Noise
(Single scan @ 10 ms) |
400:1 | |||||
| Optical Resolution (FWHM) | <1.0 nm w/25 μm slit (configuration-dependent) | |||||
| Scan rate (type)² | 74 Hz | |||||
| Thermal Wavelength Drift | 0.02 nm/° C | |||||
| Triggering | Software, External rising edge, External level | |||||
| Wavelength Range (beginning/ ending wavelengths may vary marginally) |
185-1100 nm | |||||
| Detector | ||||||
| Active Pixels | 2048 | |||||
| Corrected Linearity | 99.70% | |||||
| Electrical | ||||||
| Connectors | USB Type-C, SMA, TFM-108-02-L-DH, RS-232 | |||||
| USB Type-C Ratings: VCC | Minimum 4.40V, Nominal 5V, Maximum 5.25 V | |||||
| IO Standard | 3.3V CMOS | |||||
| Absolute Maximum Ratings: Voltage on any pin (other than input power) |
5V | |||||
| Interface | USB 2.0 High Speed | |||||
| External Triggering Jitter | 21 ns | |||||
| Mechanical | ||||||
| Physical Dimensions | 148.8 x 106.4 x 48.2 mm | |||||
| Weight | 931 g | |||||
| Input Fiber Connector | SMA 905 | |||||
| Environmental | ||||||
| Temperature (operation) | 0 °C – 55 °C | |||||
| Temperature (storage) | -30 °C to 70 °C | |||||
| Humidity | <85% | |||||
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
HR Series – Manual
HR Series – Product Sheet
Industries
show DATA — DO NOT CHANGE ID–
