.
HR-2VIS700
1800 Line Holographic .
Specifications
Entrance Slit | HR-2VIS700-5 | HR-2VIS700-10 | HR-2VIS700-25 | HR-2VIS700-50 | HR-2VIS700-100 | HR-2VIS700-200 |
Optical and Spectroscopic | ||||||
Wavelength Range (configuration-dependent) |
530-645 | |||||
Resolution | 0.12 | 0.16 | 0.2 | 0.336 | 0.64 | 1.224 |
Integration Time | 1 μs – 2 s | |||||
OSF | Y/N | |||||
Dynamic Range | 3400:1 | |||||
Signal-to-Noise (per second with High Speed averaging mode) | 25800:1 | |||||
Signal to Noise
(Single scan @ 10 ms) |
380:1 | |||||
Optical Resolution (FWHM) | <1.0 nm w/25 μm slit (configuration-dependent) | |||||
Scan rate (type)² | 725 Hz | |||||
Thermal Wavelength Drift | 0.02 nm/°C | |||||
Triggering | Software, External rising edge, External level | |||||
Wavelength Range (beginning/ ending wavelengths may vary marginally) |
220-1050 nm | |||||
Detector | ||||||
Active Pixels | 2098 | |||||
Corrected Linearity | 99.40% | |||||
Electrical | ||||||
Connectors | USB Type-C, SMA, TFM-108-02-L-DH, RS-232 | |||||
USB Type-C Ratings: VCC | Minimum 4.40V, Nominal 5V, Maximum 5.25V | |||||
IO Standard | 3.3V CM | |||||
Absolute Maximum Ratings: Voltage on any pin (other than input power) |
5V | |||||
Interface | USB 2.0 High Speed | |||||
External Triggering Jitter | 21 ns | |||||
Mechanical | ||||||
Physical Dimensions | 148.8 x 106.4 x 48.2 mm | |||||
Weight | 931 g | |||||
Input Fiber Connector | SMA 905 | |||||
Environmental | ||||||
Temperature (operation) | 0 °C – 55 °C | |||||
Temperature (storage) | -30 °C to 70 °C | |||||
Humidity | <85% |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–