Preconfigured Maya2000 Pro Series
Maya2000 Pro spectrometers are a great choice for applications requiring…
Show .
HR2000+ES Spectrometer
HR series spectrometers are small-footprint, high-resolution spectrometers that are well suited for applications such as wavelength characterization of lasers and LEDs, monitoring of gases and monochromatic light sources, and determination of elemental atomic emission lines. Depending on spectrometer configuration, optical resolution as fine as <0.1 nm (FWHM) is possible.
An enhanced-sensitivity (-ES) version is available with a detector collection lens that increases light collection efficiency in the optical bench.
HR series spectrometers are available with different detectors, in standard and extended-wavelength range options, and with enhanced sensitivity optics for applications like plasma monitoring and solar irradiance.
HR2000+ES Spectrometer
Features
- High resolution performance
- Flexible triggering functions
- High speed acquisition
- Electronic shutter
specifications
Spectroscopy: |
|
|---|---|
| Wavelength Range | 190nm – 1.1μm |
| Optical Resolution | ~0.9 nm FWHM |
| Integration Time | 1ms – 65s |
| Dynamic Range | 8.5 x 107 (system); 1300:1 for a single acquisition |
| Input Fiber Connector | SMA 905 |
|
Signal to Noise Ratio |
250:1 (full signal) |
| Stray light | <0.05% at 600 nm; <0.10% at 435 nm |
Detector: |
|
| Grating | GRATING_#HC1 |
|
Pixels |
2048 |
| Detector | linear silicon CCD array |
| Entrance slit | 10 µm |
| Detector Collection Lens | Yes |
Electronics: |
|
| Connectors | 480 Mbps, 2-wire RS-232, I2C 2-wire serial bus, USB 2.0 |
| Power Consumption | 220 mA at 5 VDC |
|
Strobe Functions |
2 programmable strobe signals (single/continuous) |
Environmental: |
|
| Humidity | 0% – 90% non-condensing |
| Operating Temperature | -10° to 50° C |
| Storage Temperature | -30° to 70° C |
Physical: |
|
| Dimensions | 148.6 x 104.8 x 45.1 mm (5.9 x 4.1 x 1.8 in.) |
| Weight | 0.57 kg (1.26 lbs.) |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
HR Series Product Sheet
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
* For More Information Please Click Here
Spares and accessories for HR2000+ES Spectrometer
HR4-CBL-DB15
Connecting the Flame and X-platform spectrometers is easy with our range of cables and connectors. These spectrometers have a connector called the DD4 connector. It has a low profile, high density 40 pin connector type, similar to those used on many modern consumer electronic devices, such as tablets and smartphones. This lets us pack a lot into a small space!
Preconfigured Ocean HDX Spectrometers
Ocean HDX spectrometer uses a robust optical bench design, optimized…
Show 