Custom Configured Flame Spectrometer

.

PRODUCT

Custom Configured Flame Spectrometer

Flame series spectrometers deliver all the benefits of miniature, modular spectroscopy — without comprise.

These compact spectrometers integrate performance-enhancing features and are produced using industry-leading manufacturing techniques. Enjoy the benefits of greater thermal stability and lesser unit-to-unit variability, plus the freedom of interchangeable slits, simple device connectors and LED status indicators.

request a quote

Do NOT CHANGE OR REMOVE THIS ELEMENT

Custom Configured Flame Spectrometer

Features

User Interchangeable Slits
Indicator LEDs
Thermal Stability
Reduced Unit to Unit Variation
Configurability
Plug & Play Operation
Ease of Integration

specifications

Subject to change depending on model type

Spectroscopic:
Optical resolution	~0.1-10.0 nm FWHM (configuration dependent)
Signal-to-noise ratio	250:1 (full signal), 300:1 (at full signal)
Dark noise	50 RMS counts
Dynamic range	1300:1 for a single acquisition, 8.5 x 10^7 (system)
Integration time	1 ms – 65 seconds, 3.8 ms – 10 seconds
Corrected linearity	>99%
Electronics:
A/D resolution	16 bit
Power consumption	250 mA @ 5 VDC
Inputs/Outputs	8 x user programmable GPIOs
Trigger modes	4 modes
Strobe functions	Yes
Gated delay feature	Yes
Connectors	USB, high density 40 pin JAE DD4 connector
Detector:
Detector	Sony ILX511B linear silicon CCD array, Toshiba TCD1304AP linear silicon CCD array
Detector range	190-1100 nm, 190-1100 nm
Pixels	2048, 3648
Physical:
Dimensions	89.1 mm x 63.3 mm x 31.9 mm (34.4 mm with feet)
Weight	265 g