.
SR-2XR250
500 Lines Blazed at 250 nm
SR-2XR250
Specifications
| Entrance Slit | SR-2XR250 | SR-2XR250 | SR-2XR250 | SR-2XR250 | SR-2XR250 | SR-2XR250 |
| Optical and Spectroscopic | ||||||
| Wavelength Range (configuration-dependent) |
220-1050 | |||||
| Resolution (FWHM) (configuration-dependent) |
1.44 | 1.54 | 2.02 | 3.12 | 5.76 | 11.52 |
| Integration Time | 1 μs – 2 s | |||||
| OSF | Y | |||||
| Dynamic Range for single acquisition1 | 3400:1 | |||||
| Signal-to-Noise (maximum SNR per 1 second w/High Speed Averaging Mode) | 25800:1 | |||||
| Signal to Noise
(Single scan @ 10 ms) |
380:1 | |||||
| Scan rate (type)² | 630 Hz | |||||
| Thermal Wavelength Drift | 0.02 nm/°C | |||||
| Triggering | Software, External rising edge, External level | |||||
| Grating | Configurable | |||||
| Detector | ||||||
| Active Pixels | 2098 | |||||
| Corrected Linearity | 99.7% | |||||
| Electrical | ||||||
| Connectors | USB Type-C, SMA, 16 pin Samtec TFM, RS-232 | |||||
| Power-up Time | 3 s | |||||
| Power Requirements | 5VDC | |||||
| Mechanical | ||||||
| Physical Dimensions | 88.1 x 63.5 x 31.45 mm | |||||
| Weight | 275 g | |||||
| Input Fiber Connector | SMA 905 | |||||
| Environmental | ||||||
| Temperature (operation) | 0 °C – 55 °C | |||||
| Temperature (storage) | -30 °C to 70 °C | |||||
| Humidity | <85% | |||||
| Operation | For indoor use | |||||
| Operating Altitude (maximum) | 2000 m | |||||
| Overvoltage Category | 1 | |||||
| Pollution Degree | 2 | |||||
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
SR Series – Manual
SR Series – Product Sheet