Automatic Potentiometric Titrator (AT-710B)
The AT-710 Automatic Potentiometric Titrator Series, is a powerful instrument…
Show .
Automatic Potentiometric Titrator (AT-710M)
The AT-710 Automatic Potentiometric Titrator Series, is a powerful instrument that can accommodate 2 burette drives, allowing operators to run 2 different methods without swapping burettes, the Burette drive unit is designed to be more compact than before and can be installed in A4 size. Each burette drive has quick swap-out burettes for even greater flexibility. The piston head is improved, so the design means that air bubbles are not produced so much. It can upgrade to an advanced model. All AT-710 series titrators have a propeller stirrer configuration but can be easily switched to a magnetic stirrer. Although referred to as the “basic” model, the AT-710B has a software CD that operators can use to create, edit, and save methods on their computers. Methods can be transferred to the titrator or data from the titrator to a laptop with a USB thumb drive. Sample changer (CHA-700) (option) can be connected. A sample changer of compact 6 or 11 samples can be connected and used for multiple sample measurements. As an option, a keyboard for entering numbers and a barcode reader for setting the sample that allows the user to start measuring without touching a device are installed.
Automatic Potentiometric Titrator (AT-710M)
Features
- Titrant Information is stored in an IC chip in the burette unit (Smart burette)
- Information stored in the electrode cable (Smart electrode)
- New burette unit
- Up to 4 simultaneous measurements (Simultaneous titration)
- Can be connected to MKV-710B Volumetric, MKC-710B Coulometric or MKH-710/2nd Hybrid Karl Fischer moisture Titrator
- The main control unit and a titrator are separately located by wireless(Bluetooth(R))
- Large color TFT-LCD with a touch panel(8.4-inch)
- Two different user levels and permisions
- Two different potentials , such as pH/ transmittance , pH/ conductivity or pH/ temperature can be logged simultaneously.
- Monitoring temperature during titration ensures safe measurements
- Measurement results are converted to PDF and can be stored in a USB flash drive
specifications
| Type | Automatic Potentiometric Titrator |
|---|---|
| Model | AT-710M |
| Product configuration | MCU-710M + AT-710 + IDP-100 + Propeller stirrer |
| Detection range | 1) Potentiometric : -2000mV to +2000mV
2)pH :-20.000 to 20.000pH 3)Temp. : 0 to 100°C |
| Titration mode | Auto Titration , Auto Intermit , Intermit , Stat , Petroleum Titration , COD |
| Method | Standard method 120 , Combined method 10 (Max 5 methods can be linked) |
| Kinds of titration | Potentiometric (acid/base , redox , precipitation) , Photometric , Polarization , Conductivity |
| Titration form | Full titration (Auto EP detection) , EP Stop , Level Stop , Intersect , EP Stop/Level Stop |
| Special application | Measurement of electrode potential (pH , potential) , Acid dissociation constant (pKa)
Simultaneous recording of 2-way input potential (e.g. Titer vs. pH+%T , Titer vs. pH+μS) , Learn |
| Key operation | Touch panel |
| Displays | 1) 8.4-inch color LCD 800 x 600 dots
2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish / German / French 3) 3) Simultaneous 4-channel display (Can also display |
| Calculation | Concentration of content , statistics data processing (mean , SD and RSD) and automatic averaging of blank and factor value |
| Data storage | 500 samples |
| GLP conformance | Registration of operator / User group administration Titrant : Reminder of date of factor measurement / Alarm to indicate remaining reagent / Reminder of piston replacement date / Reminder of reagent replacement date / History of factor measurement
Check performance :Reminder of scheduled checkdate / Record of check results
Management of electrode : Reminder of calibration date / Record of calibration history / Electrode check / History of electrode check
Verification of burette capacity : Verification of burette capacity
Management of conduction time : Display of operating time |
| Burette size | 20mL glass burette with brown cover (Standard) Optional burette units : 10mL , 5mL , or 1mL |
| Burette accuracy | 50mL burette(Auto dispenser) +/- 0.5mL 20mL burette +/- 0.02mL ; reproducibility +/- 0.01mL 10mL burette +/- 0.015mL ; reproducibility +/- 0.005mL 5mL burette +/- 0.01mL ; reproducibility +/- 0.003mL 1mL burette +/- 0.005mL ; reproducibility +/- 0.001mL |
| Preamplifier | 1) STD :pH (mV) and mV , 2 inputs (Standard)
2) PTA 3) POT 4) CMT 5) TET |
| External I/O | RS-232C port x3 : for Dot matrix printer/Electronic balance/Data Capture Software (SOFT-CAP)
SS-BUS x1 : for Multiple sample changer , APB ELE. x1 : for Smart electrode USB x1 : for USB flash drive , Thermal printer , A4 printer , Keyboard , Barcode reader , Foot switch , USB HUB TEMP.COMP. x1 : Input terminal for temperature sensor to correct reagent volume , sensor Pt100 , temperature reading accuracy : +/- 0.5°C (burette 1 only) LAN ×1 : for Personal computer (PC) |
| Extensibility | Measuring instrument : Automatic Potentiometric Titrator (AT-710) , Karl Fischer Moisture Titrator (MKV-710/MKC-710/MKH-710); Three of these instruments can be addedAutomatic piston burette : Can control max 10 burette drives (Including two built-in burette drives)Multiple sample changer : CHA-600 , CHA-700 |
| Ambient condition | 1) Temperature:5 to 35°C
2) Humidity |
| Power source | AC100 to 240V +/- 10% 50/60 Hz |
| Power consumption | Main unit : Approx. 30W
Printer : Approx. 7W |
| Dimensions | Touch panel controller : 225(W) x 190(D) x 42(H)mm
Titration unit : 141(W) x 296(D) x 367(H)mm (not incl. tubing) Printer : 106(W) x 180(D) x 88(H) mm |
| Weight | Touch panel controller : Approx. 1.5kg
Titration unit : Approx. 4.0kg Printer: Approx. 0.4kg |
| Conformity standard | CE marking EMC : EN61326-1 LVD : EN61010-1 RE Directive Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Automatic Potentiometric Titrator [AT-710M]
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for AT-710M
Multiple Sample Changer [CHA-700]
6 or 11 samples can be loaded for continuous measurement with connection of AT-710M, AT-710S, AT-710B and AT-700 Automatic Potentiometric titrator.
Propeller Stirrer
This option is attached to either a magnetic stiller stand or titration stand for use.
Automatic Potentiometric Titrator (AT-710S)
The AT-710 Automatic Potentiometric Titrator Series, is a powerful instrument…
Show