Visible-NIR Reflection Probes with Reference Leg

.

PRODUCT

Visible-NIR Reflection Probes with Reference Leg

A reflection/backscattering probe with a built-in reference leg is a convenient solution for long-term measurements and experiments in which variation or instability in the spectral output of the light source is expected to affect the reflection spectrum.

Available in both premium- and lab-grade, these probes include a reference leg that splits off from the light source connector for monitoring your illumination (or reference) source via a second spectrometer.

request a quote

Do NOT CHANGE OR REMOVE THIS ELEMENT

Visible-NIR Reflection Probes with Reference Leg

Features

Probe design
Setup
Reference leg
Probe type

specifications

Subject to change depending on model type

Engineering:
Fiber Core Size	200 µm
Jacket	PVDF zip tube, Silicone-coated steel monocoil
Length	2 m
Probe Ferrule Diameter	6.35 mm (1/4″)
Breakout	Midway point of assembly at 1 meter
Buffer Materials	Polyimide
Cladding OD	10 µm
Cladding OD Tolerance	± 4 µm
Connector	SMA 905
Fiber Core Size Tolerance	± 4 μm
Long Term Bend Radius	8 cm
Maximum OD	243 µm
Numerical Aperture	0.22 ± 0.02 (equivalent to an acceptance angle of 24.8° in air)
Primary Buffer OD	10 µm
Primary Buffer OD Tolerance	± 5 µm
Probe Ferrule Length	76.2 mm (3″)
Probe Ferrule Material	Stainless steel
Probe Fiber Bundle	6 illumination fibers around 1 read fiber
Short Term Bend Radius	4 cm
Environmental:
Operating Temperature	-65 to 300 °C