.

PRODUCT

Radiometric Calibrated Light Sources

Radiometrically calibrated light sources from Ocean Insight are used to calibrate the absolute spectral response of a spectrometer system. Using these light sources and our software, you can determine absolute intensity values across UV, Visible and NIR wavelengths.

Radiometrically calibrated light sources are carefully characterized to deliver a known quantity of light with very low uncertainty. Each source is measured to NIST-traceable standards, creating an unbroken chain of traceability and providing you with the highest quality and most reliable data.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Features

  • Stable sources
  • Multiple options
  • Digital calibration data
  • Applications flexibility

specifications

Subject to change depending on model type

Engineering:
Nominal Bulb Power 25 W (deuterium), 20 W (tungsten halogen), 5 W
Source Deuterium & Tungsten Halogen, Tungsten halogen
Wavelength Range 210nm – 1.1μm
Calibrated For Absolute irradiance (µW/cm2/nm), Absolute irradiance (µW/cm2/nm)
Calibration Lifetime 50 hours
Drift (Voltage) <0.01% per hour, <0.3% per hour
Minimum Uncertainty Level 3%, 3.7% at 700nm, 4.0% at 700nm, 7%
Stability (Current) <5 x 10-6 peak-to-peak (0.1-10.0 Hz), 0.5% peak-to-peak
Warm-up Time 15 minutes, 40 minutes (deuterium), 40 minutes (deuterium), 20 minutes (tungsten halogen)
Environmental:
Safety & Regulatory CE, ROHS, WEEE
Operating Humidity Specification 5-95% without condensation at 40 °C, 5-95% without condensation at 40°C
Operating Temperature 5 °C – 35 °C
Physical:
Fiber Connector Integrating sphere, SMA 905; CC-3, SMA 905; CC-3-UV-S or 6.35 mm barrel for cosine corrector
Shutter Yes
Dimensions 14 x 6 x 6 cm, 15 x 13.5 x 28.5 cm
Power Consumption 1.2 A @ 12 VDC, Approximately 78VA
Power Requirements 85-264 V, 50/60 Hz
Weight 0.5 kg, 6 kg

Manufacturers

show DATA — DO NOT CHANGE ID–

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

Menu