Krypton Light Source
ecoVis is a compact, low-voltage Visible-NIR light source (400-2500 nm) with built-in cuvette holder that’s great for basic lab measurements in teaching labs and other research environments. Its rugged, solid alloy housing helps to dissipate heat and in-line fiber ports allow for absorbance and fluorescence measurements.
ecoVis has a 1 cm pathlength cuvette holder with a chromium-plated reflective insert that increases the output for fluorescence, can be adjusted through 90° to block the light path for dark measurements, and holds the cuvette securely in place.
Krypton Light Source
Features
- Versatile
- Multipurpose
- Low voltage
- Compact
specifications
Subject to change depending on model type
Engineering: |
|
---|---|
Nominal Bulb Power | 1.3 W |
Source | Krypton Halogen |
Typical Output Power | 3.07 mW |
Wavelength Range | 400nm – 2.5μm |
Drift of Optical Output | < 0.5 % per hour |
Source Lifetime | 2,000 hours (typical) |
Stability of Light Source Output | 0.06% peak-to-peak |
Warm-up Time | 10 minutes |
Environmental: |
|
Safety & Regulatory | CE, ROHS, WEEE |
Operating Humidity Specification | 5-95% without condensation at 40 °C |
Operating Temperature | 5 °C – 35 °C |
Physical: |
|
Fiber Connector | SMA 905 |
Shutter | No |
Cuvette Pathlength | 10 mm |
Dimensions | 9.5 cm x 5 cm |
Integrated Cuvette Holder | Yes |
Integrated Filter Holder | No |
Power Consumption | up to 4 W |
Power Requirements | 3.5 VDC |
Replacement Chrome-plated Insert for Cuvette Holder | ECOVIS-INSERT |
Weight | 0.3 kg |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for Krypton Light Source
ECOVIS-INSERT
Optional covers are available for 1 cm pathlength CUV-series cuvette holders. These covers fit over the sample chamber to block ambient light from the sample. Standard and “tall” versions are available.
Also available for use with CUV-series fluorescence cuvette holders are mirrored screw plugs, which are inserted into a collimating lens port on the cuvette holder to redirect energy to the sample or collimating lens.
ECOVIS-PS3.5