Onefive ORIGAMI XP High Energy Femtosecond Laser
The first all-in-one air-cooled, microjoule femtosecond laser. The ORIGAMI XP…
Show .
ORIGAMI IRO Femtosecond Optical Parametric Amplifier System
ORIGAMI IRO is a widely tunable, cost-effective femtosecond laser and optical parametric amplifier system. Get the industry-leading beam pointing stability and compactness of the air-cooled ORIGAMI XP and the ORIGAMI IRO’s fully automated, environmentally stable OPA technology.
Cost-efficient femtosecond laser and OPA
The ORIGAMI IRO is an advanced Optical Parametric Amplifier (OPA) that provides widely tunable, multi-µJ fs pulses ranging from 210 nm to 11 µm.
Ideal for pump-probe spectroscopy and material characterization
It is designed for a diverse range of applications such as optical material & device characterization, femtosecond pump-probe spectroscopy, time-resolved spectroscopy and photoluminescence (TR3, TRPES, TRPL), photoelectron-photoion coincidence spectrometry (PEPICO), coherent anti-stokes Raman spectroscopy (CARS), two-dimensional infrared spectroscopy (2D-IR), terahertz emission studies, and nonlinear microscopy.
ORIGAMI IRO Femtosecond Optical Parametric Amplifier System
Features
- 8 µJ to 75 µJ pump energy options
- Fully air-cooled laser and OPA
- Available tunability from 210 nm to 11 µm (UV, VIS, IR)
- Single-shot to 600 kHz rep rate
- Completely automated and fully computer-controlled
- Long-life and stable operation with a sealed inner case to protect sensitive components
- TCP/IP remote control with the standardized command set for easy programming
- 24/7 integrated performance monitoring of both the laser system and ORIGAMI IRO
- Optional bypass for SHG beam (green)
- Full UV/VIS/NIR from a single aperture
- Industry-leading beam pointing stability maintains alignment in experiments at any wavelength
- Stable, reliable, and alignment-free
- User-friendly by software and hardware design
specifications
Pump Laser Parameters |
|
|---|---|
| Input Power | 4 or 5 W |
| Input Energy | 8 – 75 µJ |
| Input Center Wavelength | 1030 nm |
| Input Polarization | Linear |
| Repetition Rate | Up to 600 kHz (2 MHz by custom request) |
| Pulse Width | < 400 fs (350 fs typical) |
Main Specifications |
|
| Conversion Efficiency at Peak | 12 %, Signal + Idler |
| Time Bandwidth Product | < 1 |
| Pulse Width | < 200 fs |
| Output Bandwidth | 70 – 120 cm-1 (typical) |
| Polarization | 210 nm – 2600 nm: Horizontal IR extension: Vertical |
| Performance Monitor | Integrated 24/7 monitoring and data logging of both pump laser and OPA conditions (e.g. beam position/pointing, repetition rate, pulse energy) |
| Wavelength Calibration | Factory calibrated, ± 2 nm at 650 – 950 nm |
| Beam Routing and Separation | Integrated, fully automated |
| Mechanical Design | Monolithic OPA and UV/VIS option; IR Option separate; Laser separate |
| Cooling | Air-Cooled; OPA & laser |
| Software, PC, and Automation | Included (embedded PC) |
| Remote Control | Possible via TCP/IP (SCPI command set), Windows Remote Desktop |
Tuning Range |
|
| Base Unit | 630 – 2600 nm |
| UV/VIS Extension (Optional) | 210 – 630 nm |
| IR Extension (Optional) | Up to 11 µm |
Environmental/Electrical/Mechanical |
|
| Operation Temperature | 15°C to 25°C, < 60%, non-condensing |
| Storage Temperature | 5°C to 50°C, < 80%, non-condensing |
| Power Supply | 100-240 V, 50-60 Hz |
| Power Consumption | <100 W |
| Dimensions, LxWxH | 677 mm x 447 mm x 162.3 mm (dimensions may vary depending on options) |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
ORIGAMI IRO Datasheet
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
* For more information please click here.
aeroPULSE FS50 High Power Femtosecond Laser
The aeroPULSE FS50 is our new industrial-grade femtosecond fiber laser…
Show 
aeroPULSE FS20 High Power Femtosecond Lasers
aeroPULSE FS is a portfolio of industrial-grade femtosecond fiber lasers…
Show 
SuperK FIANIUM Supercontinuum Lasers
The SuperK FIANIUM supercontinuum white light lasers are broad as…
Show