.

PRODUCT

FLAME-T-XR1

Flame series spectrometers deliver all the benefits of miniature, modular spectroscopy — without comprise.

These compact spectrometers integrate performance-enhancing features and are produced using industry-leading manufacturing techniques. Enjoy the benefits of greater thermal stability and lesser unit-to-unit variability, plus the freedom of interchangeable slits, simple device connectors and LED status indicators.

Flame -XR models cover UV through Visible-NIR wavelengths.

Do NOT CHANGE OR REMOVE THIS ELEMENT

Features

  • User Interchangeable Slits
  • Indicator LEDs
  • Thermal Stability
  • Reduced Unit to Unit Variation
  • Configurability
  • Plug & Play Operation
  • Ease of Integration

specifications

Detector:
Detector linear silicon CCD array
Entrance slit 25 µm
Grating GRATING_#XR1
Pixels 3648
Detector Collection Lens No
Electronics:
A/D Resolution 16 bit
Connectors USB, high density 40 pin JAE DD4 connector
Inputs/Outputs 8 x user programmable GPIOs
Trigger Modes 4 modes
Power Consumption 250 mA @ 5 VDC
Physical:
Dimensions 89.1 mm x 63.3 mm x 31.9 mm (34.4 mm with feet)
Weight 265 g
Spectroscopy:
Integration Time 3.8ms – 10s
Optical Resolution 1.70 nm FWHM (typical)
Wave Length Range 200nm – 1.025μm
Corrected linearity >99%
Dark Noise 50 RMS counts
Dynamic Range 1300:1 for a single acquisition, 8.5 x 10^7 (system)
Input Fiber Connector SMA 905
Signal to Noise Ratio 300:1 (full signal)

Manufacturers

show DATA — DO NOT CHANGE ID–

Document

Flame High-Performance Product Sheet

Industries

show DATA — DO NOT CHANGE ID–

Methods

show DATA — DO NOT CHANGE ID–

* For More Information Please Click Here

Spares and accessories for FLAME-T-XR1

LED Kits

LSM LEDs are available in discrete wavelengths ranging from 265-880 nm and in a warm white option with color temperature of 3689 K. LSM LEDs accommodate multiple mounting options and are supplied with a rugged plastic case.

Kit versions (the controller plus selected wavelength units) cover UV (265, 280, 310, 365 nm) and Visible (405, 470, 533, 635 nm) wavelengths, or can be purchased with a mix of wavelength models (280, 365, 470 nm and 3689K warm white). A kit with all wavelengths is also available.

General Purpose Cuvette Holders

Ocean Insight offers cuvette holders for a variety of absorbance and fluorescence sampling needs. Both discrete and direct-attach holders are available and integrate seamlessly with our spectrometers, light sources and optical fibers.

UV-Visible Fibers

Our lab-grade and premium-grade UV-Visible optical fiber assemblies are durable, high-quality patch cords that deliver uniform results with minimal signal variance. Patch cords act as both illumination and read fibers and connect easily to Ocean Insight spectrometers, light sources and sampling accessories.

UV-Visible patch cords are high OH fibers that transmit efficiently from 300-1100 nm. Visible-NIR (400-2100 nm) and solarization-resistant (180-800 nm and 200-1100 nm) options are also available.

Visible-NIR Fibers

Our lab-grade and premium-grade UV-Visible optical fiber assemblies are durable, high-quality patch cords that deliver uniform results with minimal signal variance. Patch cords act as both illumination and read fibers and connect easily to Ocean Insight spectrometers, light sources and sampling accessories.

Visible-NIR patch cords are low OH fibers that transmit most efficiently from 400-2100 nm. UV-Visible (300-1100 nm) and solarization-resistant (180-800 nm and 200-1100 nm) options are also available.

FLAME-CBL-DD4P-DB15P

Connecting the Flame and X-platform spectrometers is easy with our range of cables and connectors. These spectrometers have a connector called the DD4 connector. It has a low profile, high density 40 pin connector type, similar to those used on many modern consumer electronic devices, such as tablets and smartphones. This lets us pack a lot into a small space!

FLAME-CBL-DD4-DH-HPX

Connecting the Flame and X-platform spectrometers is easy with our range of cables and connectors. These spectrometers have a connector called the DD4 connector. It has a low profile, high density 40 pin connector type, similar to those used on many modern consumer electronic devices, such as tablets and smartphones. This lets us pack a lot into a small space!

FLAME-CBL-DD4P-PAK50P

Connecting the Flame and X-platform spectrometers is easy with our range of cables and connectors. These spectrometers have a connector called the DD4 connector. It has a low profile, high density 40 pin connector type, similar to those used on many modern consumer electronic devices, such as tablets and smartphones. This lets us pack a lot into a small space!

Menu