Density / Specific Gravity Meter [DA-100]
The built-in thermostatic control makes measurement stable in resulting values.…
Show DA-650 | DA-645 | DA-640 | ||
Measurement Range | 0 – 3 g/cm3 | |||
Measurement Temp Range | 0 – 96℃ (32 – 204.8°F) | |||
Accuracy*1 | Density | ±2 x 10-5/gcm3 (±0.00002 g/cm3) |
±5 x 10-5g/cm3 (±0.00005 g/cm3) |
±1 x 10-4g/cm3 (±0.0001 g/cm3) |
(Calibration with air and water required.) | ||||
Temp | ±0.02°C (±0.04° F) |
±0.03°C (±0.05° F) |
±0.05°C (±0.09° F) |
|
Repeatability *2 | Density | SD 5 x 10-6g/cm3 | SD1 x 10-5g/cm3 | SD 5 x 10-5g/cm3 |
Minimum Sample Required | 1) Approx. 1mL (Syringe) 2) Approx. 2mL (Pump) | |||
Measurement Time | 1) 1 to 4 mins (Manual) 2) 2 to 10 mins (Auto) | |||
Display | 1) 5.7-inch colour TFT LCD; 640 x 480 2) Shows density, specific gravity, oscillation frequency, temperature, concentration and other messages. |
|||
Viscosity Correction | Yes | |||
Sampling | 1) Manual by syringe 2) Auto by peristaltic pump |
|||
Method | Saves up to 100 different methods in built-in memory | |||
Stability | Four modes of stability according to measurement accuracy and time | |||
Density Auto Correction | 1) Saves conversion table or formula at your desired temperatures according to your samples. 2) Temperature conversion table programmed according to ASTM standard for petroleum, petroleum products and lubricating oils. |
|||
Auto Conversion | 1) Between concentration and density 2) Between temperature and density |
|||
Statistics | 1) Auto or manual calculation of mean value, SD and coefficient 2) Recalculation, data deletion |
|||
Interfaces | 1) LAN: x 1; Personal computer (PC) 2) USB 1.1: x 2; USB flash drive, keyboard, barcode reader, Epson inkjet printer *3 3) RS232C: x 2; Dot Matrix Printer, Auto Clean and Sampling Unit, Multiple Sample Changer |
|||
Options | 1) Printer : DP-600, IDP-100 2) Sampling unit, Changer : DCU-551N/H, CHD-502N/H/C 3) Software : SOFT-CAP (Data Acquisition Software) |
|||
Data I/O | 1) USB flash drive as data storage medium 2) Application Notes provided in USB flash drive |
|||
Wetted Materials | PTFE, borosilicate glass, SUS304 | |||
Ambient Conditions | 1) Temperature : 5 – 35℃ (41℃ – 95°F) 2) Humudity : 85%RH or below (No condensation allowed) |
|||
Power Supply | AC100 – 240V; 50/ 60Hz (Comes with AC adapter) | |||
Power Consumption | 40W (max. 120W, min.20W) | |||
Dimensions | 320 (W) x 365 (D) x 250 (H) mm (12.6 (W) x 14.4 (D) x 9.8 (H) inches) |
|||
Weight | 18kg (39.7Ibs) | |||
Export Packing in Double Carton Box | G/W 21kg; 540 (W) x 480 (D) x 460 (H) mm (G/W 46.3Ibs; 21.3 (W) x 18.9 (D) x 18.1 (H) inches) (May vary in some cases) |
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
Multiple Sample Changer [CHD-502N]
30 samples can be loaded for continuous measurements.
Pressurized sampling by pump.
Room temperature only.
JCSS Accredited Density Standard Liquid
It can be used to guarantee the quality of calibration for oscillation-type density meters.