Seta Multiflash Tag Flash Point Module – 34400-0
The automatic Tag module conforms precisely to national and international Tag closed cup flash point test methods. It comprises a water bath, sample cup, lid and shutter, temperature probe and a DIPS pod containing the dipping mechanism with co-axial gas/electric ignitor.
The Tag module must be used with the Multiflash Automatic Flash Point – Universal Base Unit (34000-0). The base unit recognises that the Tag module is connected and instantaneously sets up standard test parameters and calibration data. The Cooling Boost Accessory (34008-0) is required to test all types of sample.
Seta Multiflash Tag Flash Point Module – 34400-0
Features
- Fully self-contained flash point test module
- Ambient to 93 °C (200 °F)
- Conforms to the Tag test method requirements
- Automatic set up of test parameters
- Automatic heating control and flash detection
- Automatic test results and end of test audible warning
- Centigrade or Fahrenheit temperature display
- Automatic barometric correction
specifications
TEMPERATURE RANGE | Ambient to 93 °C (5 °C to 93 °C with optional cryostat) |
---|---|
BATH | Liquid |
HEATING | Hot Plate |
POST TEST COOLING | Fan assisted or Circulating liquid / external cryostat. Requires Cooling Boost Accessory (34008-0) |
POST TEST COOL-DOWN TIME (90°C TO 50°C) | 40 minutes (Fan) 3 minutes (external cryostat) |
IGNITOR | Quick-fit coaxial gas jet / electric hot wire, user selectable (Electric hot wire pilot light for gas jet) |
TEMPERATURE PROBES | Class A platinum resistance thermometers |
FLASH DETECTION | Thermocouple |
GAS SUPPLY (GAS JET IGNITOR) | Laboratory gas, 3 kPa (0.44 psi) maximum pressure |
COOLING SUPPLY | Water (5 °C and above) Water / Ethylene Glycol 50/50 (below 5 °C) 125kPa (18psi) maximum pressure |
VOLTAGE | 110/120 V or 220/240 V, 50/60 Hz, (switchable) |
POWER | 1 kW |
SIZE (HXWXD) | 340 x 470 x 340 mm |
WEIGHT | 12 kg |
CCCN CODE | Tariff 90268020 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 34400-0
Cooling Module – 34008-0
For installation in the Multiflash base unit, which enables rapid cooling of the Cleveland test module. This is also a required accessory when using the Abel and Tag modules.
Flash Detector (Multiflash PMCC, Tag, Abel) – 34100-001
Flash Detector for use with Seta Multiflash Abel Flash Point Module (34200-0) and Seta Multiflash Tag Flash Point Module (34400-0).
Ignitor (Multiflash Tag) – 34400-005
Sample PRT Probe (Multiflash Tag) – 34400-002
Printer Paper (Pack of 20) – 81002-301
58 mm width. For use with Data Printer (81002-3).
FLASHCHECK (pack of 3 x 80 ml) – 99880-0
FLASHCHECK is a highly cost effective & non-hazardous Secondary Working Standard suitable for verification of ASTM, CEN, ISO, IP and equivalent flash point testing procedures.