.
SR-6UV220
UV-UPGD 1800 Line Holographic UV
Specifications
| Entrance Slit | SR-6UV220-5 | SR-6UV220-10 | SR-6UV220-25 | SR-6UV220-50 | SR-6UV220-100 | SR-6UV220-200 |
| Optical and Spectroscopic | ||||||
| Wavelength Range (configuration-dependent) |
185-400 | |||||
| Resolution (FWHM) (configuration-dependent) |
0.36 | 0.384 | 0.504 | 0.78 | 1.44 | 2.88 |
| Integration Time | 7.2 ms-5 s | |||||
| OSF | Y | |||||
| Dynamic Range for single acquisition1 | 12000:1 | |||||
| Signal-to-Noise (maximum SNR per 1 second w/High Speed Averaging Mode) | 3500:1400:1 | |||||
| 400:1 | ||||||
| Scan rate (type)² | 74 Hz | |||||
| Thermal Wavelength Drift | 0.02 nm/°C | |||||
| Triggering | Software, External rising edge, External level | |||||
| Grating | Configurable | |||||
| Detector | ||||||
| Active Pixels | 2048 | |||||
| Corrected Linearity | 99.7% | |||||
| Electrical | ||||||
| Connectors | USB Type-C, SMA, 16 pin Samtec TFM, RS-232 | |||||
| Power-up Time | 3 s | |||||
| Power Requirements | 5VDC | |||||
| Mechanical | ||||||
| Physical Dimensions | 88.1 x 63.5 x 31.45 mm | |||||
| Weight | 275 g | |||||
| Input Fiber Connector | SMA 905 | |||||
| Environmental | ||||||
| Temperature (operation) | 0 °C – 55 °C | |||||
| Temperature (storage) | -30 °C to 70 °C | |||||
| Humidity | <85% | |||||
| Operation | For indoor use | |||||
| Operating Altitude (maximum) | 2000 m | |||||
| Overvoltage Category | 1 | |||||
| Pollution Degree | 2 | |||||
1. Dynamic range for a single acquisition is a measure of the ratio of full signal to noise.
2. Scan rate is dependent on factors external to the spectrometer. This figure was obtained using OmniDriver and OceanDirect APIs.
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
SR Series – Manual
SR Series – Product Sheet
Industries
show DATA — DO NOT CHANGE ID–