Vibratory Feeder – with V-shaped channel LABORETTE 24
The Vibratory Feeder LABORETTE 24 is ideal for automatic, uniform feeding of free-flowing materials into sample dividers, mills or mixers in your laboratory. The vibration, which is controlled by a microprocessor, conveys the sample material out of the funnel over the V-shaped stainless steel channel into the respective equipment. The flow rate can be individually adjusted; the vibration amplitude is precisely controlled – for absolute uniform feed of even smallest quantities. Safe and reliable.
The Vibratory Feeder LABORETTE with a V-shaped feeder channel made of stainless steel is ideal for a narrow directed material feed between 1 g/min and 1,500 g/min.
Through vibration of a channel of stainless steel, free-flowing material is conveyed out of a funnel and to the open end of the channel in a uniform stream. The rate of flow can be controlled individually with a separate control device by modifying the vibration amplitude of the channel. Control of the vibration amplitude is performed by a microprocessor-controlled control unit with which even the smallest quantities of material can be conveyed with absolute uniformity.
Vibratory Feeder – with V-shaped channel LABORETTE 24
Features
- As a standard, with polished stainless steel channel and funnel, PTFE-coating on request
- Precisely controlled by microprocessor control with interface
- Extensive choice of flow rates for smallest and largest quantities
- Simple to clean due to easily removable components
- Small footprint
- Separate control unit for simple regulation of sample flow
- Material bed height is variable, can be regulated by adjusting the funnel height according to the material
- V-shaped and U-shaped channels easy to interchange
- Maintenance-free electromagnetic drive and components
- Recyclable, compact cast housing
- Low energy consumption, only 0.1 kW drive power
specifications
Complete length of the channel | 330 mm |
---|---|
Channel overlap | 215 mm |
Suitable for | narrow, directed material feed of free-flowing materials |
Max. feed quantity | 1,500 g/min |
Min. feed quantity | 1 g/min |
Change of the channel | V-shaped channel and U channel can be easily exchanged |
Electrical Details | 200-240 V/1~, 50-60 Hz, 25 Watt |
Instrument also available in the following voltage | 100-120 V/1~, 50-60 Hz, 25 watt – order no. 24.0040.00 |
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be feed and conveyor speed) | approx. LpAd = 34 dB |
Weight | 12 kg |
Dimensions (W x D x H) | bench top instrument 44 x 14 x 34 cm |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–