.
Seta Oil Test Centrifuge – 4 place
The Seta Oil Test Centrifuge is a heated chamber centrifuge used to determine water and sediment in oils. The large diameter chamber, with four place rotors and cushioned adaptors allows the use of 6 and 8 inch conical, pear-shaped, trace sediment and 12.5 ml tubes.
The swing-out rotor ensures that samples are held near vertical when at rest allowing precise measurement of sediment. The centrifuge features a hinged lid that opens to the fully upright position to allow easy loading and unloading of tubes between tests.
Speed, temperature, and timing are microprocessor-controlled. Run parameters are entered via a liquid-proof ‘touch panel’ and digital display.
Seta Oil Test Centrifuge – 4 place
Features
- Isothermal heaters fitted internally to the centrifuge chamber
- Temperature control using unique algorithm to compensate for air resistance heating
- 4 place swing out rotor
- Static, near vertical bucket positioning
- Specifically designed for testing oils
- Heated chamber, ambient to 80 °C
- Pre-heat facility to ensure bowl is at test temperature prior to test
- Universal buckets for 12.5 ml, 6 and 8 inch glassware
- Microprocessor control with 99 memories
- Optional trolley
Specifications
| Maximum Relative Centrifugal Force (RCF) | 2210 g |
| Maximum Rotational Speed | 3000 rpm |
| Temperature Range | 20 to 80 °C ±1 °C |
| Timer Range | 10 seconds to 1 hour (10 second steps) 1 hour to 99 hours 59 minutes (1 minute steps) Continuous running until manually stopped |
| Control | Microprocessor with 99 memory capacity |
| Capacity | 4 Samples |
| Voltage range | 230 V, 50/60 Hz (Optional transformer for 110/120 V) |
| Power | 950 W |
| Size (HxWxD) | 410 x 560 x 640 mm |
| Weight | 72.5 kg |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Industries
show DATA — DO NOT CHANGE ID–