Crude Oil Filtration Apparatus ASTM D4807 – 19727-0
ASTM D4807 covers the determination of sediment in crude oils…
Show .
Seta Oil Test Centrifuge – 6 place – 90100-0
The Seta Oil Test Centrifuge is a heated chamber centrifuge used to determine water and sediment in oils. The large diameter chamber, with six place rotor and cushioned adaptors allows the use of 6 and 8 inch conical, pear-shaped, trace sediment and 12.5 ml tubes.
The swing out rotor ensures that samples are held near vertical when at rest allowing precise measurement of sediment. The centrifuge features a hinged lid that opens to the fully upright position to allow easy loading and unloading of tubes between tests.
Speed, temperature and timing are microprocessor controlled. Run parameters are entered via a liquid proof ‘touch panel’ and digital display.
Seta Oil Test Centrifuge – 6 place – 90100-0
Features
- Isothermal heaters fitted internally to the centrifuge chamber
- Temperature control using unique algorithm to compensate for air resistance heating
- 6 place swing out rotor
- Static, near vertical bucket positioning
- Specifically designed for testing oils
- Heated chamber, ambient to 80 °C
- Pre-heat facility to ensure bowl is at test temperature prior to test
- Universal buckets for 12.5 ml, 6 and 8 inch glassware
- Microprocessor control with 99 memories
- Optional trolley
- Precise heating for accurate results
- Fast and easy operation
- Safety features
- Setafuge Hazard Reduction System
- Supplied with Rotor, Buckets and cushions
Specifications
| Maximum Relative Centrifugal Force (RCF) | 2210 g |
|---|---|
| Maximum Rotational Speed | 3000 rpm |
| Temperature Range | Ambient +5 °C in the range of 20 to 80 °C (1 °C steps) |
| Timer Range | 10 sec to 100 hours or continuous operation |
| Control | Microprocessor with 99 memory capacity |
| Capacity | 6 Samples |
| Voltage Range | 230 Vac, 50/60 Hz (Optional transformer for 110/120 V) |
| Power | 950 W |
| Size (HXWXD) | 410 × 560 × 640 mm |
| Weight | 72.5 kg |
| CCCN Code | Tariff 84211920 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Seta Oil Test Centrifuge Brochure
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for Seta Oil Test Centrifuge – 6 place
Tube 8 inch x 100 ml cone-shaped (Pack of 6) – 90040-0
Pack of 6, 100 ml cone-shaped, 8 inch Centrifuge tube which is graduated to 0.05 ml. For use with the Seta Oil Test Centrifuge (90000-3 and 90100-0).
Bucket Adaptor for 90040-0 & 90060-0 (pack of 4) – 90001-2
Pack of 4 bucket adaptors for use with Seta Oil Test Centrifuge (90000-3 and 90100-0).
Tube 6 inch x 100 ml pear-shaped (Pack of 6) – 90050-0
Pack of 6, 100 ml x 6 inch pear-shaped centrifuge tube, the tip is graduated to 0.01 ml over the range 0 to 0.02 ml. For use with the Seta Oil Test Centrifuge (90000-3 and 90100-0).
Tube 6 inch x 100 ml cone-shaped (Pack of 6) – 90011-0
Pack of 6 x 100 ml cone-shaped, 6 inch tube which is graduated to 0.05 ml. For use with the Seta Oil Test Centrifuge (90000-3 & 90100-0).
Tube 8 inch x 100 ml trace-sediment (pack of 6) – 90060-0
Pack of 6, 100 ml x 8 inch trace sediment Centrifuge tubes, the tip is graduated to 0.005 ml over the range 0 to 0.01 ml. For use with the Seta Oil Test Centrifuge (90000-3 and 90100-0).
Transformer for 120 V 60 Hz Operation – 90016-0
Transformer for use with the Seta Oil Test Centrifuge (90000-3 & 90100-0).
High Level Centrifuge Trolley – 90015-0
High Level Centrifuge Trolley with lockable castors, height is 59 cm alone or 99 cm with the 4 or 6 place Seta Oil Test Centrifuge (90000-3 & 90100-0).
Low Level Centrifuge Trolley – 90014-0
Low Level Centrifuge Trolley with lockable castors, height is 28 cm alone or 68 cm with the 4 or 6 place Seta Oil Test Centrifuge (90000-3 & 90100-0).
Bucket Adaptor for 90011-0 Tube (pack of 4) – 90005-2
Bucket Adaptor for use with the 6 inch x 100 ml cone-shaped Centrifuge Tube (90011-0).
Bucket Adaptor for 90050-0 (Pack of 4) – 90003-
Bucket Adaptor for 6 inch x 100 ml pear shaped centrifuge tubes (90050-0), supplied in a pack of 4.
Stoppers (Pack of 50) – 90041-2
Pack of 50 tube stoppers for use with the Seta Oil Test Centrifuge (90000-3 and 90100-0).
Centrifuge Tube 12.5 ml (Pack of 6) – 90012-0
Pack of 6 x 12.5 ml Centrifuge Tubes for use with the Seta Oil Test Centrifuge (90000-3 & 90100-0).
Adaptor for 90012-0 Centrifuge Tube (Pack of 4) – 90002-0
Adaptor for 12.5 ml Centrifuge Tube (90012-0), supplied in a pack of 4.
Setafuge Hazard Reduction System – 90010-0
The use of a centrifuge in conjunction with volatile samples or samples with added solvents, at elevated temperatures, can result in the production of vapours which may be hazardous (flammable and/or toxic). In general the vapour pressure of hydrocarbons at 60 °C is approximately double that at 40 °C.
The Setafuge significantly reduces the hazards associated with vapours and gases released from samples at elevated temperatures.
Bottom Cushions (pack of 2) – 90000-301
Pack of 2 bottom inserts for use with the Seta Oil Test Centrifuge.
Digital Photo Tachometer – 99960-2
Hand held tachometer with quartz crystal micro-controller and optical (non-contact) sensor, which measures a wide speed range to a high degree of accuracy. Large LCD display with a choice of display units, minimum/maximum and memory functions.
Supplied with Carry case, Reflecting tape and Certificate of conformity.
Thermometer Digital: -199 to 199 °C UKAS Calibrated – 82012-0
High accuracy PT100 thermometer, for checking the calibration and accuracy of Vapour Pressure Testers (81000-2) as well as other temperature sources.