.
MUX8-R2 Extension Set
The PalmSens series and EmStat Blue can be used to work with multiple working electrodes or a sensor array by means of a multiplexer. The multiplexer switches between the working electrodes in the range of milliseconds. This MUX8-R2 extension set, adds an additional 8 cells to your multiplexer.
Connection
The most selected connection option uses two double shielded D-Sub cables ending in 2 mm banana plugs. As alternatives PalmSens can provide a PCB with screw terminals, D-Sub cable ending in ferrules or Screen Printed Electrode Adapter. Each of these cables can be connected to 4 channels, if all 8 channels are used, two cables are needed.
MUX8-R2 Extension Set
Features
- Each MUX8-R2 multiplexer enables to work with up to eight 2- or 3- electrode systems.
- Daisy chaining multiple MUX8-R2 boards (expansion up to 128 channels)
- All hardware settings are controlled by the software making it unnecessary to flick a physical switch
- LEDs to show which channel is selected
- Allows to connect auxiliary input (like temperature sensor)
Specifications
System |
|
|---|---|
| number of channels | 8 (up to 128 when daisy chained) |
| multiplexer | switches 8 x (WE, S, RE and CE) |
| on resistance for WE | 1.5 ohm typical |
| charge injection on WE | 20 pC typical |
| Potentiostat (controlled potential mode) | < 20 pA (5 pA typical) at 25 ºC |
| switching time | 2 ms |
| compliance voltage | ± 10 V |
Other |
|
| housing | aluminium: 138 mm x 121 mm x 37 mm |
| weight | +/- 500 g |
| temperature range | 0 ºC to + 50 ºC |
| power supply | USB |
Connections |
|
| Connector | Function |
| Input | Y-cable connects to both potentiostat sensor connector and (digital) AUX |
| AUX | Can be used to measure auxiliary input like temperature or pH, and to switch external hardware using two digital control lines that can be set in PSTrace |
| Link | Connects to Input of next multiplexer, for daisy-chaining multiple multiplexers |
| USB-C | Input for extra power when ≥3 multiplexers are daisy-chained |
| Channel 1-4 | Connects to sensor cables 1-4 |
| Channel 5-8 | Connects to sensor cables 5-8 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–