.
Seta Block Heater – 90300-2
A processor controlled heater you can use in conjunction with the Block for Seta Block Heater (90301-2, not included). The heater has a temperature range of 15 to 130 °C.
The heater is equipped with a 1 to 999 minute countdown timer with buzzer, a temperature deviation alarm that you can set from 0.5 to 10 °C to able deviation, an external temperature probe socket and a delay start stop feature that allows the heater to be turned on or off after a predetermined time interval.
You can calibrate the heater over a wide temperature range.
Seta Block Heater – 90300-2
Features
- Centrifuge/Sample Pre-heater
- Liquidless dry block heating
- Temperature range: 15 °C to 130 °C
- 4 tube capacity
- 999 minute timer
- Supplied with Block extractor tool, Mains lead and Instruction manual
Specifications
| Temperature Range | 15 to 130 °C |
|---|---|
| Stability | ±0.1 °C |
| Timer Range | 1 to 999 mins |
| Heating Power | 200 W @ 110 V 300 W @ 240 V |
| Voltage | 110/120 V, 50/60 Hz 220/240 V, 50/60 Hz |
| Size (HXWXD) | 10 x 20 x 28 cm |
| Weight | 3 kg |
| CCCN Code | Tariff 84219100 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Seta Block Heater Brochure
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for Seta Block Heater – 90300-2
Block for Seta Block Heater – 90301-2
Aluminium block for use with the Seta Block Heater (90300-2). The block holds four cone-shaped tubes (8 inch x 100 ml, 90040-0) or four trace-sediment tubes (100 ml, 90060-0).
Tube 8 inch x 100 ml cone-shaped(Pack of 6) – 90040-0
Pack of 6, 100 ml cone-shaped, 8 inch Centrifuge tube which is graduated to 0.05 ml. For use with the Seta Oil Test Centrifuge (90000-3 and 90100-0).
Tube 8 inch x 100 ml trace-sediment(Pack of 6) – 90060-0
Pack of 6, 100 ml x 8 inch trace sediment Centrifuge tubes, the tip is graduated to 0.005 ml over the range 0 to 0.01 ml. For use with the Seta Oil Test Centrifuge (90000-3 and 90100-0).
