The Cold Filter Plugging Point (CFPP) Apparatus determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels. It comprises a 4 litre dry ice bath (Dewar Flask) and a CFPP test insert connected via a three way cock to a UKAS certified digital manometer and two 5 litre pressure equalising vessels.
| Weight | 6 kg |
|---|---|
| CCCN Code | Tariff 90261089 |
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
Vacuum Pump – 99007-0
The Vacuum Pump is a portable diaphragm pump, used to transfer, compress and pump down without contamination. The pump is a dry-running device that can be used for a variety of laboratory applications.
Thermometer ASTMS5C: Low Haz with UKAS Certificate – ASTMS5CZ
A precision liquid in glass thermometer manufactured in conformity with ASTM E2251. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements.Solid stem, white backed, with an easy to read blue filling with a round top finish.
Thermometer ASTMS5C: Low Haz with Certificate of Conformity – ASTMS5CX
A precision liquid in glass thermometer, manufactured in conformity with ASTM E2251. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements. Solid stem, white backed, with an easy to read blue fluid with a round top finish.
Thermometer: ASTM6C – IP2C with Certificate of Conformity – ASTM6CX
ASTM E1 Liquid-in-Glass Thermometer with toluene liquid.
Portable Dry Ice Maker – Model B – 70220-3
Dry ice/liquid mixtures can produce temperatures down to -78 °C. The latent heat of vaporization of dry ice is 572 kJ/kg (246 BTU per lb). Seta dry ice makers are a safe, efficient and convenient method of producing pellets and blocks in a range of sizes.
Supplied with Pressure hose and gauge.
MTVM – Gas Oil 500 ml – 99851-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Note: Each MTVM sample provides a single value for all parameters, shown below with nominal values stated.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.
Multi Test CRM – Gas Oil 500 ml – SP9000-0
Multi Test Certified Reference Material’s (MTCRM) are premium level, dual certified reference materials. Certified in accordance with ISO 17025 and ISO 17034 under UKAS accreditation. They provide both calibration and verification options for laboratory test equipment, from the same sample. With their values certified to the highest level of accreditation and integrity, available globally.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a certificate which gives the certified value for each test method covered by the material.
