.
Seta Copper Corrosion Block Bath – 11308-0
A precision, processor controlled, block heater bath. Supplied with four test wells and designed to take copper corrosion test tubes. The heater has a temperature range of ambient to 200 °C.
The heater is equipped with a 1 to 999 minute countdown timer with buzzer, a temperature deviation alarm that you can set from 0.5 to 10 °C to able deviation and a delay start stop feature that allows the heater to be turned on or off after a predetermined time interval.
You can calibrate the heater over a wide temperature range.
Seta Copper Corrosion Block Bath – 11308-0
Features
- Dry heating for up to four test samples
- Accommodates four 25 mm OD test tubes
- Rapid heat up time
- ±0.1 °C accuracy at 150 °C
- Over temperature cut off
- Fault warning Indicator
- Function timer for delayed start / stop (1 min – 72 hours)
specifications
| TEMPERATURE RANGE | Ambient to 200 °C |
|---|---|
| TEMPERATURE STABILITY | ±0.1 °C |
| NO OF TEST STATIONS | Four |
| HEATER POWER | 3 kW |
| VOLTAGE | 110/120 V, 50/60 Hz or 220/240 V, 50/60 Hz |
| SIZE (HXWXD) | 120 x 200 x 280 mm |
| WEIGHT | 15 kg (Including block) |
| TIMER RANGE | 1 to 999 mins |
| CCCN CODE | Tariff 27090090 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Seta Copper Corrosion Block Bath – 11308-0
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Seta Copper Silver Block Bath – 11310-0
The solid block bath is specifically designed for measuring thin…
Show