The Setavap 2 vapour pressure tester is used for the measurement of gasoline, solvents, light crude oils, and similar products, using the “Mini” method. Fully evacuated chamber technology guarantees that the sample is tested under a full vacuum, as required by the “Mini” test methods. Unlike the expansion technologies that rely on moving pistons.
| TEST TEMPERATURE | 37.8 °C (100 °F) ±0.1 °C |
|---|---|
| TEST PRESSURE RANGE | 0 to 200 kPa ±0.5 kPa (0 to 29 psi ±0.1psi) |
| PRESSURE RESOLUTION | 0.1 kPa (0.1 psi) |
| SAMPLE SIZE | 3 ml |
| VAPOUR TO LIQUID RATIO | 4:1 |
| DISPLAY UNITS OF PRESSURE | kPa or psi (user selectable) |
| VACUUM REQUIREMENT | better than 0.01 kPa (abs) |
| VOLTAGE | 110/120 V or 220/240 V, 50/60 Hz (switchable) |
| POWER | 70 W |
| SIZE (HXWXD) | 37 x 13 x 20 cm |
| WEIGHT | 3.5 kg |
| CCCN CODE | Tariff 90262020 |
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
Vacuum Pump – 22422-6
Maximum vacuum 2 x 10^-2 mbar.For use with the Setavap 2 Vapour Pressure Tester (81000-2).
Syringe with Luer Lock and Needles – 81003-0
Syringe for use with the Setavap 2 Vapour Pressure Tester (81000-2). Includes a 5 ml gas tight syringe with Luer lock and two needles.
Septum (Pack of 250) – 22420-033
Waste Container – 81000-003
Waste container for use with the Setavap 2 Vapour Pressure Tester (81000-2).
Septum Holder – 81000-005
Septum holder for use with the Setavap 2 Vapour Pressure Tester (81000-2).
Needles for syringe (Pack of 2) – 81003-002
For use with Syringe with Luer lock (81003-0) and Syringe 5 ml, with Luer Lock (81003-001).
Syringe 5 ml, with Luer Lock – 81003-001
Printer Paper (Pack of 20) – 81002-301
58 mm width. For use with Data Printer (81002-3).
Vapour Pressure – Certified Reference Material, Pentane 200 ml – 80610-0
Suitable for verification of Setavap and other mini method instruments, used to determine the vapour pressure of volatile liquid petroleum products, ethanol blends, hydrocarbons and hydrocarbon-oxygenate mixtures.
Portable Digital Barometer – 99910-2
Highly accurate, handheld barometer suitable for the most demanding field or laboratory conditions.The barometer allows you to measure absolute pressure, barometric pressure (corrected to sea level) or altitude based upon sea level or corrected for a map or trig marker.You can display pressure in one of seven different engineering units. Altitude can be displayed in either meters or feet. The barometer has a leak test mode to determine the rate of leakage in a pneumatic system, with data logging which is either automatic (taking readings every 5 seconds for 20 minutes) or manual for up to 240 readings.
MTVM – Motor Gasoline 500 ml – 99854-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Rapid global delivery and compliance with ISO 17025 & ISO 9001 requirements, mean that Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.
