Volumetric KF Moisture Titrator (MKV-710B)
The inexpensive MKV-710B Karl Fischer Moisture Titrator is a KF…
Show .
Volumetric KF Moisture Titrator (MKV-710D)
The MKV-710 Series is a KF titrator for volumetric water content determination from a few ppm to 100% reliably and precisely in solid, liquid and gaseous samples.The MKV-710D has a large color TFT-LCD with a touch panel (8.4-inch) that makes it possible to display the titration curve while experimenting and it can connect wirelessly. The controller can also be connected to a computer via LAN cable. The MKV-710 Series is a powerful little instrument that can accommodate 2 burette drives, allowing operators to run 2 different methods without swapping burettes, the Burette drive unit is designed to be more compact than before and can be installed in A4 size. Each burette drive has quick swap-out burettes for even greater flexibility. The piston head is improved, so the design means that air bubbles are not produced so much. All of the MKV-710 series some standard with a propeller stirrer configuration but can be easily switched to a magnetic stirrer. The MKV-710 series is supplied with a software CD that operators can use to create and save methods on their computer. Methods can be transferred to the titrator or data transferred from the titrator to a computer with a USB drive. Users can proceed with all models of the volumetric Karl Fischer to D series. It can show a simultaneous 2-channel display. MKV-710D is similar to the S series and was also developed to support DI (Data Integrity) based on GMP (Good Manufacturing Practice). This titrator has some accessories such as; an Evaporator ADP-611 and a touch panel for Key operation. This series is more usable in manufacturing drugs.
Volumetric KF Moisture Titrator (MKV-710D)
Features
- Dl support function
- Large color TFT-LCD with a touch panel (8.4-inch)
- The main control unit and a titrator are separately located by wireless (Bluetooth(R)).
- Measurement results can be saved in PDF files.
- The Water content can be displayed in real time.
- Burettes can be selected from 1-unit and 2-unit types
- Not necessary to change the electrode sensitivity and endpoint potential
specifications
| Type | Karl Fischer Moisture Titrator | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | MKV-710D | |||||||||||||||||||||||||||||
| Standard configuration | MCU-710D+MKV-710+Automatic Solvent Change unit | |||||||||||||||||||||||||||||
| Measuring method | Karl Fischer Volumetric titration | |||||||||||||||||||||||||||||
| Measuring range |
|
|||||||||||||||||||||||||||||
| Burette precision |
|
|||||||||||||||||||||||||||||
| Endpoint detection | By polarized potential level detected with a twin platinum electrode | |||||||||||||||||||||||||||||
| EP sense method | Detection of potential level maintained during preset end time. End time range : 1 to 99s |
|||||||||||||||||||||||||||||
| Titration form | Normal titration / Back titration (Option additional burette required) | |||||||||||||||||||||||||||||
| Key operation | Touch panel | |||||||||||||||||||||||||||||
| Required solvent | 30 to 100mL (in S-type titration vessel) | |||||||||||||||||||||||||||||
| Displays |
|
|||||||||||||||||||||||||||||
| Calculation |
|
|||||||||||||||||||||||||||||
| Data storage | Method: 120 (per channel) Measurement results: 5,000 samples (per channel) Operation history: 100,000 (Total for 2 channels) |
|||||||||||||||||||||||||||||
| DI support function | Access Restrictions: Operator authentication by operator ID and password Rights Administration: Each operator is assigned to a specific right group Audit Trail: Operation history is automatically recorded Electronic Approval / Electronic Signature: Electronic approval and signature based on the workflow Backup / Restoration: Automatic backup with the predetermined period Archive / Archive View: Data storage. Archived data can be viewed on the main control unit Data Capacity: The remaining capacity can be checked any time via an icon on the main screen Security Setup: Password length and lockout settings can be set LIMS Connection: Data output to LIMS systems |
|||||||||||||||||||||||||||||
| Extensibility | RS-232C port x4 : for Dot matrix printer , Electronic balance , Data Capture Software (SOFT-CAP) , Evaporator USB ×1 : for USB flash drive , A4 printer , Thermal printer , Keyboard , Barcode reader , Foot switch , USB HUB LAN ×1 : for Personal computer (PC) |
|||||||||||||||||||||||||||||
| External I/O |
|
|||||||||||||||||||||||||||||
| Ambient condition |
|
|||||||||||||||||||||||||||||
| Power source | AC100 to 240V +/- 10% 50/60 Hz | |||||||||||||||||||||||||||||
| Power consumption | Main unit :Approx. 30W |
|||||||||||||||||||||||||||||
| Dimensions |
|
|||||||||||||||||||||||||||||
| Weight |
|
|||||||||||||||||||||||||||||
| Conformity standard | CE marking EMC : EN61326-1 LVD : EN61010-1 RE Directive Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01 |
|||||||||||||||||||||||||||||
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Karl Fischer Moisture Titrator (Volumetric titration) [MKV-710D]
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for [MKV-710D]
Software for Moisture Titrator [KF-Win]
KF-Win software enables your PC to control KEM’s Karl Fischer Moisture Titrators, MKV-710B, MKC-710B, MKC-520, MKA-520, MKS-520, MKC-510N, MKA-510N or MKS-510N. When it is connected to MKV-710B or MKC-710B, the functions equivalent to MKV-710M or MKC-710M will be available.
Volumetric KF Moisture Titrator (MKV-710S)
The MKV-710 Series is a KF titrator for volumetric water…
Show 
Volumetric KF Moisture Titrator (MKV-710M)
The MKV-710 Series is a KF titrator for volumetric water…
Show