.
Seta Cloud and Pour Point Bath – 11010-2
The Cloud and Pour Point test bath determines the lowest temperature at which petroleum oils will flow and the temperature at which wax crystals form. This identifies the minimum safe operating temperature.
The bath accommodates four test jackets and a bath thermometer and comes with a stainless steel cover and a drain tap.
Seta Cloud and Pour Point Bath – 11010-2
Features
- Four test positions
- Temperature range 9 °C to -69 °
- Supplied with four graduated jars, corks, insulating gaskets and discs.
Specifications
| Size (HXWXD) | 17 x 32 x 18 cm |
|---|---|
| Weight | 4.3 kg |
| CCCN Code | Tariff 90261089 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Seta Cloud and Pour Point Bath – 11010-2 Brochure
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for Seta Cloud and Pour Point Bath – 11010-2
Thermometer similar to ASTM61C: Low Haz with Works Certificate – ASTMST61C
A precision liquid in glass thermometer. Containing a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements. Solid stem, white backed, with an easy to read blue fluid and a round top finish.
Supplied with a works certificate. Also available with a UKAS certificate of calibration upon request.
Pressure Vessel – 11500-0
For copper & silver strip corrosion tests and for pour point tests. The test vessel is constructed from stainless steel, fitted with an O-ring seal and a screw-top closure. It is capable of withstanding maximum test pressure of 700 kPa (100 psi).
For use with Seta Cloud and Pour Point Bath (11010-2), Seta Copper Corrosion Block Bath (11310-0), Seta Cloud and Pour Point Cryostat (93531-8), Seta Compact Cloud and Pour Point Cryostat (94100-3), Seta Oxi-Cor Bath (15550-3)
Thermometer ASTMS5C: Low Haz with UKAS Certificate – ASTMS5CZ
A precision liquid in glass thermometer manufactured in conformity with ASTM E2251. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements.Solid stem, white backed, with an easy to read blue filling with a round top finish.
Thermometer: ASTM6C – IP2C with Certificate of Conformity – ASTM6CX
ASTM E1 Liquid-in-Glass Thermometer with toluene liquid. Supplied with certificate of conformity, also available with UKAS Calibration Certificate upon request.
Metal Jacket (Pack of 2) – 11000-001
For use with the SETA Cloud and Pour Point Bath (11010-2).
MTVM – Gas Oil 500 ml – 99851-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Note: Each MTVM sample provides a single value for all parameters, shown below with nominal values stated.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.
MTVM – Fuel Oil 500 ml – 99852-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.
Seta Compact Cloud and Pour Point Cryostat – 94100-4
The Seta Compact Cloud and Pour Point Cryostat has three…
Show