Setaflash Series 3 ActiveCool Flash Point Tester – 33200-3
Setaflash Series 3 ActiveCool provides fast and reliable flash point…
Show .
Setaflash Series 3 Flash Point Tester – 30000-3
The Setaflash Series 3 closed cup flash point tester provides fast and reliable flash point results and requires minimum expertise.
With the Series 3, a test takes less than 2 minutes with just a 2 or 4 ml sample size. A simple user interface with colour digital display and touchscreen icons guides you through the straightforward testing process. For easy record keeping the instrument stores 100,000 test results which can be saved and transferred via a USB port.
Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.
Setaflash Series 3 Flash Point Tester – 30000-3
Features
- Ambient to 300 °C
- Simple test procedure
- Compact, rugged design
- Automated flash detection
- Ramp mode
- Automatic barometric pressure correction
- USB port and result storage
specifications
| TEMPERATURE RANGE | Ambient to 300 °C |
|---|---|
| TEMPERATURE SELECTION | °C or °F |
| HEATING/COOLING METHOD | Cartridge |
| TEMPERATURE RAMP MODE/th>
Up to 6 °C/min |
|
| DATA STORAGE | 1 GB |
| VOLTAGE | 100 to 240 Vac, 50/60 Hz |
| SIZE/WEIGHT | 195 x 295 x 140mm / 3 kg |
| CCCN CODE | Tariff 90268020 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Setaflash Series 3 Flash Point Tester – 30000-3
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 30000-3
Sample Well O-Ring, Silicone (Pack of 5) – 13770-004
Suitable for most samples except JET A1/Aviation Fuels and Kerosines. For high temperature applications with Setaflash Series 3 Flash Point Testers and gas ignition Series 8 Flash Point Tester models.
Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311
4 ml sample volume syringe, which must be used for flash points above 100 °C.
Silicone Rubber Tube 4 metres – 13730-005
Replacement gas tubing for use with Flash Point Testers.
Sample Well O-ring, Viton (Pack of 5) – 13740-004
Viton, 1/8th inch. Suitable for JET A1/Aviation fuels and kerosines. For use with Setaflash Series 3 Flash Point Testers or gas ignition Series 8 models, for temperatures up to 200 °C.
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
2 ml sample volume must be used for flash points under 100 °C and 2 ml sample volume is required for all FAME products at all temperatures.
Flash Detector Assembly – 13740-425
For use with the Setaflash Series 3 Flash Point Tester range.
Heat Sink Compound – 13740-017
Heat Sink Compound for the calibration of the Seta PM-93 Pensky Martens Flash Point Tester’s (35000-0) temperature probe.
Small Scale Certified Flash Point Material (50 ml) – 99878-3
Small scale flash point material for use with various Seta Flash Point Testers. The material has a nominal certified flash point value of 75 °C (uncertainty 1.2 °C).
Portable Digital Barometer – 99910-2
Highly accurate, handheld barometer suitable for the most demanding field or laboratory conditions.
Setaflash Series 8 Closed Cup Flash Point Tester – High Temperature – 82000-2
The Setaflash Series 8 closed cup flash point tester provides…
Show 