Setaflash Series 3 Flash Point Tester – 30000-3
The Setaflash Series 3 closed cup flash point tester provides…
Show .
High Temperature Ignitor for use use with the Series 8 and Series 3 ActiveCool Flash Point Testers.
Setaflash Series 3e ActiveCool Flash Point Tester – 33220-0
Setaflash Series 3e ActiveCool provides fast and reliable flash point results and requires minimum operator expertise. It has been designed to rapidly and efficiently carry out Flash / No Flash tests to determine the flash point of liquids and semi-solids in the 10 to 135 °C temperature range.
• Compliance
• Safety
• Product quality
• 2 ml of sample and a result in less than 2 minutes
Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.
Setaflash Series 3 ActiveCool has a very simple user interface with colour digital display and touch screen icons which guide the operator through a straightforward testing process. For easy record keeping the instrument stores test results which can be saved and transferred via a USB port.
The versatile range of Setaflash instruments is ideal for use in the laboratory, production line or for portable test applications.
Setaflash Series 3e ActiveCool Flash Point Tester – 33220-0
Features
- Flash / No Flash & Ramp modes
- Electric ignitor
- 10 to 135°C temperature range
- Flash point test in less than 2 minutes
- Small sample size (2 or 4ml)
- Automatic flash detection
- Electronic peltier cooling
- Inbuilt touch screen
- Inbuilt USB port
- Portable operation
- °C or °F display
specifications
| TEMPERATURE RANGE | 10 to 135 °C |
|---|---|
| SAMPLE CUP MATERIAL | Aluminium |
| TEST MODES | Rapid Equilibrium and Ramp |
| SAMPLE SIZE | 2 ml for flash points up to 100 °C 4 ml for flash points above 100 °C |
| TEST DURATION | 1 minute below 100 °C, 2 minutes above 100 °C, or user determination 1 to 99 minutes |
| RAMP RATE | 2 °C/min ramp |
| HEATING AND COOLING SYSTEM | Peltier Cell |
| POWER | 200 W (maximum) |
| VOLTAGE | 100/240 V, 50/60 Hz |
| IGNITOR | Electric |
| SIZE (HXWXD) | 195 x 295 x 140 mm |
| WEIGHT | 3 kg |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Setaflash Series 3e ActiveCool Flash Point Tester – 33220-0
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 33220-0
High Temperature Ignitor for Series 8 and Series 3 – 82000-202
Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311
4 ml sample volume syringe, which must be used for flash points above 100 °C.
Flash Detector Assembly – 13740-425
For use with the Setaflash Series 3 Flash Point Tester range.
Sample Well O-ring, Viton (pack of 5) – 82150-001
Pack of 5 x 1/16th inch Viton O-rings, for use with the Setaflash Series 8 Flash Point Tester (82100-0 & 82150-0).
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
2 ml sample volume must be used for flash points under 100 °C and 2 ml sample volume is required for all FAME products at all temperatures.
Heat Sink Compound – 13740-017
Heat Sink Compound for the calibration of the Seta PM-93 Pensky Martens Flash Point Tester’s (35000-0) temperature probe.
Small Scale Certified Flash Point Material (50 ml) – 99878-3
Small scale flash point material for use with various Seta Flash Point Testers. The material has a nominal certified flash point value of 75 °C (uncertainty 1.2 °C).
Portable Digital Barometer – 99910-2
Highly accurate, handheld barometer suitable for the most demanding field or laboratory conditions.
Setaflash Series 3e ActiveCool Flash Point Tester – Corrosion Resistant Cup – 33270-0
Setaflash Series 3e ActiveCool provides fast and reliable flash point…
Show 
Setaflash Series 8 ActiveCool Flash Point Tester – 82100-2
The Setaflash Series 8 ActiveCool, closed cup flash point tester…
Show