Setaflash Series 3 ActiveCool provides fast and reliable flash point results and requires minimum operator expertise. It has been designed to rapidly and efficiently carry out Flash / No Flash tests to determine the flash point of liquids and semi-solids in the 10 to 135 °C temperature range.
• Compliance
• Safety
• Product quality
• 2 ml of sample and a result in less than 2 minutes
Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.
Setaflash Series 3 ActiveCool has a very simple user interface with colour digital display and touch screen icons which guide the operator through a straightforward testing process. For easy record keeping the instrument stores 100,000 test results which can be saved and transferred via a USB port.
The versatile range of Setaflash instruments are ideal for use in the laboratory, production line or for portable test applications.
| TEMPERATURE RANGE | 10 to 135 °C |
|---|---|
| CUP MATERIAL | Aluminium or stainless steel insert |
| TEST MODES | Rapid Equilibrium and Ramp |
| SAMPLE SIZE | 2 ml for flash points up to 100 °C 4 ml for flash points above 100 °C |
| TEST DURATION | 1 minute below 100 °C, 2 minutes above 100 °C, or user determination 1 to 99 minutes |
| RAMP RATE | 2 °C/min ramp |
| HEATING AND COOLING SYSTEM | Peltier Cell |
| POWER | 200 W (maximum) |
| VOLTAGE | 100/240 V, 50/60 Hz |
| GAS SUPPLY | Laboratory gas, 3 kPa (0.44 psi) maximum pressure or Butane from optional Portable Gas Tank 13667-0 |
| SIZE (HXWXD) | 195 x 295 x 140 mm |
| WEIGHT | 3 kg |
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
show DATA — DO NOT CHANGE ID–
Gas Tank – 30000-206
Gas tank for use with the Setaflash Series 3 and Series 8 Flash Point Tester range.
Syringe 4 ml (Small Scale Flash Point Instruments) – 13770-311
4 ml sample volume syringe, which must be used for flash points above 100 °C.
Silicone Rubber Tube 4 metres – 13730-005
Sample Well O-ring, Viton (Pack of 5) – 13740-004
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
2 ml sample volume must be used for flash points under 100 °C and 2 ml sample volume is required for all FAME products at all temperatures.
Flash Detector Assembly – 13740-425
Heat Sink Compound – 13740-017
Small Scale Certified Flash Point Material (50 ml) – 99878-3
Portable Digital Barometer – 99910-2
