Gas tank for use with the Setaflash Series 3 and Series 8 Flash Point Tester range.
Setaflash Series 3 Open Cup Flash Point Tester – 31000-0
The Setaflash Series 3 Open Cup Flash Point Tester is an easy to use instrument for flash/no flash, finite determinations or sustained combustion tests. Similar in design to the 30000-3, the instrument allows testing at any specific temperature within a range of ambient to 300 °C.
Setaflash Series 3 Open Cup Flash Point Tester – 31000-0
Features
- Ambient to 300 °C
- Flash point test in 1 minute
- Small sample size – 2 ml
- Audible and on-screen prompts
- Portable operation
- Simple calibration
specifications
TEMPERATURE RANGE | Ambient to 300 °C |
---|---|
SAMPLE SIZE | 2 ml |
TEST TIME | 1 minute for flash points up to 100 °C 2 minutes for flash points above 100 °C |
TEMPERATURE MEASUREMENT DEFAULT VALUES | 0.5 °C resolution 0.5 °C accuracy |
CUP MATERIAL | Blackened Aluminium |
VOLTAGE | 110/120 V or 220/240 V, 50/60 Hz (switchable) or 12 V using optional power supply |
SIZE (HXWXD) | 26 x 28 x 26 cm |
WEIGHT | 5 kg |
CCCN CODE | Tariff 90268020 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 31000-0
Gas Tank – 30000-206
Silicone Rubber Tube 4 metres – 13730-005
Replacement gas tubing for use with Flash Point Testers.
Heat Sink Compound – 13740-017
Heat Sink Compound for the calibration of the Seta PM-93 Pensky Martens Flash Point Tester’s (35000-0) temperature probe.
Syringe 2 ml (Small Scale Flash Point Instruments) – 13740-009
2 ml sample volume must be used for flash points under 100 °C and 2 ml sample volume is required for all FAME products at all temperatures.
The Setaflash Series 3 closed cup flash point tester provides…
Show Seta Semi-Automatic Cleveland Open Cup Flash Point Tester – 13811-3
The tester is equipped with an electrically heated cup with…
Show